|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
12-26-2012, 05:55 PM | #1 |
Getting Wild
Join Date: Oct 2009
Location: Jacksonville, FL
Posts: 90
|
Govenor Removal
I have my rearend tore apart so I can weld the spider gears and would like to remove all the governor parts. I remember seeing a post of someone doing this and they put a plug in the shaft hole. Anyone know of the thread or maybe something close. Thanks Clayton
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-27-2012, 09:33 AM | #2 |
Gone Wild
Join Date: Aug 2012
Location: Colona, Illinois
Posts: 473
|
Re: Govenor Removal
If I recall right you can drill and tap it to either a 3/8x18 or a 5/16 and put a bolt in.
|
12-27-2012, 06:10 PM | #3 |
Getting Wild
Join Date: Oct 2009
Location: Jacksonville, FL
Posts: 90
|
Re: Govenor Removal
Ok, Thanks. Do you know if the piece on the gear shaft needs to be removed as well? Clayton
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Need help govenor | Gas EZGO | |||
Govenor & over rev | Gas Yamaha | |||
govenor | Gas EZGO | |||
Govenor | Gas EZGO | |||
Need help with Govenor | Gas Club Car |