Is this right????

joe100 · 01-15-2021, 10:14 AM

Here’s what I’m working on

Fairtax4me · 01-16-2021, 10:20 PM

No. The second groove in the plastic end is supposed to snap into the bracket. It’s a little tricky to get them to pop in sometimes, but once it’s in there it won’t come out.
Whoever did that squeezed the bracket up with pliers. Use a flat head screwdriver to open that gap back up to about 3/16” wide or maybe a hair more. Then snap the second groove down into the bracket. If it’s a loose fit then use pliers to close it up a hair.
The rubber dust boot will then fit on the first groove.

Check at the transmission end as well and make sure it’s fit on the second groove as well.

joe100 · 01-18-2021, 01:42 PM

Ok I will do thank you so much for the explanation and info.

01-16-2021, 10:20 PM	#2
Fairtax4me Bonafide Nincompoop Join Date: Dec 2015 Location: Charlottesburg Va Posts: 8,987	Re: Is this right???? No. The second groove in the plastic end is supposed to snap into the bracket. It’s a little tricky to get them to pop in sometimes, but once it’s in there it won’t come out. Whoever did that squeezed the bracket up with pliers. Use a flat head screwdriver to open that gap back up to about 3/16” wide or maybe a hair more. Then snap the second groove down into the bracket. If it’s a loose fit then use pliers to close it up a hair. The rubber dust boot will then fit on the first groove. Check at the transmission end as well and make sure it’s fit on the second groove as well.

01-18-2021, 01:42 PM	#3
joe100 Gone Wild Join Date: Sep 2010 Location: Steger Ill. Posts: 312	Re: Is this right???? Ok I will do thank you so much for the explanation and info.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum