Mounting Lights on the TXT

SpoiledRotten · 09-07-2009, 05:16 PM

Mine point up for coon hunting. I don't coon hunt but if I did, this would be the set up. I'm going to work on a way to get them down to where they are more useful. I guess I could jack up the back to make the front of the cart point downward a little. I also thought about getting a slight spacing material and put behind the top of the light and tighten the screw back in snug. I would do that only if it didn't look like the like was ghettotally engineered.

I guess I could have spent 50.00 more and gotten the adjustable lights.

Russ/TN · 09-07-2009, 05:43 PM

I used cable ties.
Hook one around each of the bolts that retain the ez-go plate on the front of the buggy (leave about a 3 inch diameter loop on each).
In the plastic splash shield under the cowl, there is a small (3/4" +/-) hole.
You go behind the splash shield and hook a tie or 2 to the steel in front of the dash.
hook a chain of cable ties from the steel, through the hole in the splash shield, to the 2 at the nameplate.
Tighten as needed.
I found that when the nose of the buggy is flat across the front instead of rounded, the lights are GREAT! (looks good too)
Lights up a good bit more road than you need, and does not blind oncoming traffic.
If I can figure out how to post pics. I will be glad to.
Sounds rinkydink.... but works great.
Russ

Russ/TN · 09-07-2009, 05:45 PM

Sorry for the double post.

SpoiledRotten · 09-07-2009, 07:47 PM

Russ/TN, I'm looking forward to seeing the pics. Thanks for the idea.

09-07-2009, 05:16 PM	#21
SpoiledRotten Conservatively Wild Join Date: Aug 2009 Location: Below the Mason Dixon Posts: 3,610	Re: Mounting Lights on the TXT Mine point up for coon hunting. I don't coon hunt but if I did, this would be the set up. I'm going to work on a way to get them down to where they are more useful. I guess I could jack up the back to make the front of the cart point downward a little. I also thought about getting a slight spacing material and put behind the top of the light and tighten the screw back in snug. I would do that only if it didn't look like the like was ghettotally engineered. I guess I could have spent 50.00 more and gotten the adjustable lights.

09-07-2009, 05:43 PM	#22
Russ/TN Gone Wild Join Date: Jul 2009 Location: South Central Tennessee Posts: 150	Re: Mounting Lights on the TXT I used cable ties. Hook one around each of the bolts that retain the ez-go plate on the front of the buggy (leave about a 3 inch diameter loop on each). In the plastic splash shield under the cowl, there is a small (3/4" +/-) hole. You go behind the splash shield and hook a tie or 2 to the steel in front of the dash. hook a chain of cable ties from the steel, through the hole in the splash shield, to the 2 at the nameplate. Tighten as needed. I found that when the nose of the buggy is flat across the front instead of rounded, the lights are GREAT! (looks good too) Lights up a good bit more road than you need, and does not blind oncoming traffic. If I can figure out how to post pics. I will be glad to. Sounds rinkydink.... but works great. Russ

09-07-2009, 05:45 PM	#23
Russ/TN Gone Wild Join Date: Jul 2009 Location: South Central Tennessee Posts: 150	Re: Mounting Lights on the TXT Sorry for the double post. Last edited by Russ/TN; 09-07-2009 at 05:51 PM.. Reason: double post...sorry

09-07-2009, 07:47 PM	#24
SpoiledRotten Conservatively Wild Join Date: Aug 2009 Location: Below the Mason Dixon Posts: 3,610	Re: Mounting Lights on the TXT Russ/TN, I'm looking forward to seeing the pics. Thanks for the idea.

Similar Threads
Thread	Forum
Winch mounting	Design Center
Speaker Mounting	Design Center
stereo mounting	Gas EZGO
mounting a cargo box	Design Center
tire mounting	Lifted Golf Carts

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum