|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
09-10-2011, 08:18 AM
|
#71 |
|
no clue
 Join Date: Sep 2009
Location: spicewood, texas
Posts: 3,308
|
Re: DCX came on and now it won't.
colt, just scrap the reed switch and run straight from the batts. it is just was a safety feature to keep da's from driving off with the charger attached.
 |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-10-2011, 12:13 PM
|
#72 |
|
Gone Wild
Join Date: Jul 2011
Location: Houston, TX
Posts: 2,901
|
Re: DCX came on and now it won't.
Oh really? So I can remove the magnet to? That would be nice not to have to replace that crap and I won't drive off with my charger plugged in. Lol thanks Jim.
|
|
|
|
|
09-10-2011, 06:12 PM
|
#73 |
|
Gone Wild
Join Date: Jul 2011
Location: Houston, TX
Posts: 2,901
|
Re: DCX came on and now it won't.
Okay so rabbit and Jim. If I understand this correctly, the red wire will now mount to the positive radsock and just goes back to the controller molex from there. Basically bypassing the reed switch?
|
|
|
|
|
09-10-2011, 10:23 PM
|
#74 |
|
Gone Wild
Join Date: Jun 2010
Location: Central Florida
Posts: 2,757
|
Re: DCX came on and now it won't.
well I usually install a short jumper wire in place of the reed switch. The reason is that if the next owner wants to disable the cart, they can simply unplug the connector. On 1 cart I did, we ran the bypass through a remote toggle switch to act as a kill switch for the cart that his kids didn't know about.
|
|
|
|
|
09-10-2011, 10:44 PM
|
#75 |
|
Gone Wild
Join Date: Jul 2011
Location: Houston, TX
Posts: 2,901
|
Re: DCX came on and now it won't.
Will the way I posted work and be safe?
|
|
|
|
|
09-11-2011, 07:31 AM
|
#76 |
|
no clue
Join Date: Sep 2009
Location: spicewood, texas
Posts: 3,308
|
Re: DCX came on and now it won't.
what you are saying is the same thing rabbitt suggested with the jumper, i think. i am not positive on a pds cart. do like the toggle switch idea tho.
|
|
|
|
|
09-11-2011, 08:20 AM
|
#77 | |
|
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: DCX came on and now it won't.
Quote:
Considering that EZGO eliminated the reed switch in later versions, anything that applies B+ to Pin-4 of J1 will be as safe as a newer cart as long as the wiring in and of itself is safe. When I get around to installing my ProTech charger, I'll probably break out my molex tools, run a jumper from Pin-4 to Pin-5 on J1 and eliminate the wire going all the way across the cart. |
|
|
|
|
|
09-11-2011, 09:44 AM
|
#78 |
|
Gone Wild
Join Date: Jul 2011
Location: Houston, TX
Posts: 2,901
|
Re: DCX came on and now it won't.
Oh thats a good idea Johhnie.
|
|
|
|
|
09-11-2011, 10:23 AM
|
#79 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,399
|
Re: DCX came on and now it won't.
Quote" When I get around to installing my ProTech charger, I'll probably break out my molex tools, run a jumper from Pin-4 to Pin-5 on J1 and eliminate the wire going all the way across the cart. "
Now that's rocket science right there  |
|
|
|
|
09-11-2011, 07:59 PM
|
#80 |
|
Gone Wild
Join Date: Jul 2011
Location: Houston, TX
Posts: 2,901
|
Re: DCX came on and now it won't.
 |
|
|
|
Linear Mode
