2003 MCOR problem?

gcs13 · 10-09-2011, 04:30 PM

I have 2003 IQ DS cart. The mcor controller #1021011-01. The problem I have is when I push down on the accelerator it does make the cart move till about half way down. I still get 100% acceleration. I just don't like having to push the pedal that far before engaging. I have also taken up any slop in the linkage also to see if that helps, but I couldn't tell any difference. Could this be in my mcor controller? If so, is there away to check it or test it?

gcs13 · 10-10-2011, 05:49 PM

anybody?

clubcarjeff · 10-11-2011, 06:17 AM

The MCOR has 2 functions. A pedal micro switch that tells the controller that it's go time, lol, and a pedal potentiometer. Pedal up is 0% throttle and pedal fully depressed is 100% throttle. Dealers and techs will have a reader that can scan all functions and you can check MCOR percentage. The MCOR is infamous for failing and the percentage values being incorrect. Best way to fix it? Replace the MCOR.

10-10-2011, 05:49 PM	#2
gcs13 Gone Wild Join Date: Sep 2010 Location: North Ga. Posts: 312	Re: 2003 MCOR problem? anybody?

10-11-2011, 06:17 AM	#3
clubcarjeff Gone Wild Join Date: Jun 2008 Location: Austin, Tx area Posts: 209	Re: 2003 MCOR problem? The MCOR has 2 functions. A pedal micro switch that tells the controller that it's go time, lol, and a pedal potentiometer. Pedal up is 0% throttle and pedal fully depressed is 100% throttle. Dealers and techs will have a reader that can scan all functions and you can check MCOR percentage. The MCOR is infamous for failing and the percentage values being incorrect. Best way to fix it? Replace the MCOR.

Similar Threads
Thread	Forum
2003 TXT clutch problem	Gas EZGO
Problem with V-Glide to MCOR conversion	Electric Club Car
2005 precedent mcor problem	Electric Club Car
2003 TXT spark problem	Gas EZGO

10-09-2011, 04:30 PM	#1
gcs13 Gone Wild Join Date: Sep 2010 Location: North Ga. Posts: 312	2003 MCOR problem? I have 2003 IQ DS cart. The mcor controller #1021011-01. The problem I have is when I push down on the accelerator it does make the cart move till about half way down. I still get 100% acceleration. I just don't like having to push the pedal that far before engaging. I have also taken up any slop in the linkage also to see if that helps, but I couldn't tell any difference. Could this be in my mcor controller? If so, is there away to check it or test it?

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum