Electrical problems

[lpol 2951]

I have a 2000 Workhorse 800 with lights, no turn signals or state of charge meter. The S/N 1258719, MFR Code D1400, My main concern is the key switch, wiring. The schematic show on terminal (B) green wire and red wire (battery wire) and on terminal (B1) Blue. The problem I have is the accelerator stays hot while the key is in the off position. I can put the red wire on (B) and the green and blue wire on B1 and it work fine, people tell me to just leave it like that, but I known that not the way it was wired before I replace the wiring harness. I want it right and not settle for the other just because it works. Another small problem I have putting the cart in forward my back up horn go off. I swap the S! and S2 on the F/R switch, but it put my directional switch backwards, so I just disconnected for now till I find out what the problem is.

[kgsc]

Should be a B,B1, I and L. B Should have blue and red together and I would be green. That is based on factory colors. B1 and L are for headlights. If it doesn’t have state of charge meter leave the red off.