Help with alignment after 4" block lift

[genoz]

I installed a 4" block lift yesterday and I can't seem to figure out how to get the alignment correct. I have aligned the cart in the past pre-lift without any issue. Now I find that there is a 2" total toe-in and I cant adjust the tie rods anymore. they are both at their end. Any suggestions?

[coldair]

sorry I can't help with the toe in but I did notice you need new shock bushing

[Sir Nuke]

new longer tie rods will do the trick.

[Cobra,1]

Might be looking at pic wrong,but would’nt shorter sleeve be needed to make distance from tie rod end to tie rod end overall length less? Doing that would allow rear of tires to be made closer to each other allowing front tires to point further away “giveing more toe out”?

Tie rods ends screwed all the way in with still too much toe in
“Front tires pointing in towards each other”. A shorter sleeve or maybe cut sleeves shorter assuming there is enough thread left to hold tie rod ends tight.😊