|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-29-2020, 01:17 PM | #1 |
Not Yet Wild
Join Date: Apr 2017
Posts: 4
|
Programming Curtis Sepex 1264 missing parameters
Hi all
I am trying to change how fast my ezgo accelerate. When i use Curtis 1314, i get into the menus, but i can only change how fast i is allowed to drive forward and reverse. Where are all the parameters? 1314 is set up as OEM. I have tried 1314 version 3.12 build 33 patch 2 and v. 4.6.7. Any ideas? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-30-2020, 01:35 AM | #2 |
Not Yet Wild
Join Date: Apr 2017
Posts: 4
|
Re: Programming Curtis Sepex 1264 missing parameters
I got it to work last night. OEM wasn't enough. It needed to be in Factory mode.
|
06-30-2020, 07:39 AM | #3 |
Getting Wild
Join Date: Dec 2017
Posts: 109
|
Re: Programming Curtis Sepex 1264 missing parameters
How fast are you getting it to go now?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Western EZ-Go Sepex 1264-5404 | Electric EZGO | |||
Curtis PMC SepEx 1264-5407 Status Light | Electric EZGO | |||
Sepex 1264 fwd/rev input voltage? | Electric EZGO | |||
Curtis SePex 1264 Controller, is it Bad? | Electric EZGO | |||
Curtis 1243 parameters programming | Electric EZGO |