2013 EZ Go RXV after Solonoid Replacement

[badandyturbo]

Can you get your hands on a handheld diagnostic tool?

You can rent them from ebay.

[Not Walking]

Originally Posted by badandyturbo

I attached the troubleshooting guide for the petal. As far as the solenoid check for 48v on lead going to motor and from the controller.

Hey BadAndy a couple of questions re: throttle test.

#2 test says to measure voltage at rest and while depressing the pedal.
The photo shows power is still disconnected from previous test.
Where is the voltage coming from, am I missing something here?

#3 test says to measure ohms. I assume this is done with Key off?

Thanks Steve

[Threeput]

Don't know if this is relevant...but My 2009 had same problem..found the plug going into the brake contacts was not making contact ...it failed while on the course but wiggled the plug and it went OK...then I removed it
..bent the contacts in the plug in a little...all OK for a long time now