![]() |
|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Not Yet Wild
Join Date: Jul 2015
Posts: 4
|
![]() I need to replace my speed controller but I am having trouble finding one that looks like the one I have. I have 4 posts for battery cables and the ones I am fining only have three.
Does anyone know the part number to this controller? |
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Gone Wild
![]() ![]() Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,176
|
![]() Looks like a 1206 series controller but not 100%. Should be a number on it somewhere. Are you looking for original or aftermarket?
|
![]() |
![]() |
![]() |
#3 |
Techno-Nerd
![]() ![]() Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
![]() The part# is 73056-G01, but has been replaced by 73056-G04 which only has three terminals (No A2 terminal).
The A2 terminal was(is) used in things like forklifts that are routinely shifted from forward to reverse while moving. To use a three terminal controller in your cart, bolt the two wires that went to the A2 terminal together, insulate them and secure the connection so it doesn't touch anything. Or if either of the cables is long enough to go from motor to F/R switch, discard the shorter one. Or replace the two cables with one long enough to reach. |
![]() |
![]() |
![]() |
#4 |
Not Yet Wild
Join Date: Jul 2015
Posts: 4
|
![]() That helps out a lot. Thank you!
|
![]() |
![]() |
![]() |
#5 |
Not Yet Wild
Join Date: Jul 2015
Posts: 4
|
![]() I was really not sure which one to go with in aftermarket. Do you have any suggestions?
Thanks |
![]() |
![]() |
![]() |
#6 |
Gone Wild
![]() ![]() Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,176
|
![]() Two of the bigger companies are Alltrax and FSIP. Both are sold by our sponsors on this site.
|
![]() |
![]() |
![]() |
#7 |
Over This Interview Is...
![]() Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
![]() Yeah, i would skip the stock one & get something bigger from fsip or alltrax.
|
![]() |
![]() |
![]() |
#8 |
Happy Carting
![]() ![]() Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
![]() What you are showing is a 1994.5 Medalist TXT type controller with ITS throttle. FSIP doesn't make a control for this cart without the use of a throttle adapter which quite frankly I have not had the best luck with so I don't sell them. Alltrac SPM400 for campgrounds and 500 for on/off road hills, big tires, rear seats ...etc. is the best choice in my opinion. The plug and play reverse polarity protection, auto throttle calculation, and highest peak and sustained out puts make this a no brainer choice for the series TXT carts.
|
![]() |
![]() |
![]() |
#9 | |
Not Yet Wild
Join Date: Nov 2015
Posts: 12
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#10 | |
Techno-Nerd
![]() ![]() Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
![]() Quote:
With the A2 terminal connected, if you shift from F to R (or R to F) while cart is moving at a significant speed, the motor resists turning and the cart rapidly decelerates to a standstill before changing direction. (aka Plug Braking) If you don't routinely shift the cart's direction while the cart is moving at a significant speed, it doesn't matter if the A2 terminal is connected or not. If the high current connection between the motor's A2 stud and the F/R switch is two cables bolted together in the vicinity of the controller, I'd reconnect them to the A2 terminal on the controller, but if it is just one continuous cable from motor to F/R switch, I'd leave it as is. |
|
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Forum | |||
need help identifying controller part on an ezgo | Electric EZGO | |||
1991 ezgo speed controller | Electric EZGO | |||
speed controller for 1991 electric ezgo | Electric EZGO | |||
2001 EZGO / Curtis Speed controller | Golf Carts and Parts | |||
2002 EZGO 36v TXT to 36v PDS Speed Controller? | Electric EZGO |