|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
08-18-2015, 02:26 PM
|
#1 |
|
Not Yet Wild
Join Date: Aug 2015
Location: Palm Desert. Ca.
Posts: 24
|
All Trax axe 400 controller with no led
2001 ezgo txt with a all Trax 400 controller.it was working fine and just quit. 43 volts at the batteries. Solenoid has power and clicks. #1 post on,the controller has 43 volts. Still no led lighting up. Any ideas?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-19-2015, 08:36 AM
|
#2 |
|
Not Yet Wild
Join Date: Aug 2015
Location: Palm Desert. Ca.
Posts: 24
|
Re: All Trax axe 400 controller with no led
It is a 42 volt system. Just not sure what to check next. It has HD solenoid, HD f&r that seam fine.
|
|
|
|
|
08-19-2015, 08:53 AM
|
#3 |
|
Techno-Nerd
 Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: All Trax axe 400 controller with no led
If the cart is wired as usual, the AXE controller powers up when the solenoid clicks and the solenoid is clicking, so the controller may be bad.
|
|
|
|
|
08-19-2015, 09:35 AM
|
#4 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: All Trax axe 400 controller with no led
Check to be sure you have power (+) at pin #1 when the solenoid clicks.
|
|
|
|
|
08-19-2015, 10:05 AM
|
#5 |
|
Not Yet Wild
Join Date: Aug 2015
Location: Palm Desert. Ca.
Posts: 24
|
Re: All Trax axe 400 controller with no led
I have power on the # 1 pin. No power on pin 2 or 3
|
|
|
|
|
08-19-2015, 10:10 AM
|
#6 | |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: All Trax axe 400 controller with no led
Quote:
|
|
|
|
|
|
08-19-2015, 11:55 AM
|
#7 |
|
Not Yet Wild
Join Date: Aug 2015
Location: Palm Desert. Ca.
Posts: 24
|
Re: All Trax axe 400 controller with no led
Thank you
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| RXV controller not responding to upgrade handheld device to program controller | Electric EZGO | |||
| All Trax 400 amp ITS controller - refurbed | Golf Carts and Parts | |||
| Plum Quick Bandit + 500 AMP Controller OR Executioner w/ Stock Controller | Electric Club Car | |||
| Sti mud trax | Lifted Golf Carts | |||
| Programming All Trax controller | Electric EZGO | |||
Linear Mode
