Is my motor shot ??

Threewheelmotion · 09-01-2015, 10:09 AM

So I went to add gear oil and this is what I found. I know, water rust and oil... Nasty looking stuff. Probly has never been looked at. My question is , I am pretty sure these are bearings and I am also pretty sure they are shot. Where can I find them or what are they called so I will know what to look for. And how the heck do I get them out. Do I need to remove the drive shafts to let the bearings out?

09-01-2015, 11:20 AM

bearings

#26

JohnnieB · 09-01-2015, 11:36 AM

Here is a link to the bearing indicated in the parts list Crash posted: https://shop.ezgo.com/products/Beari...286007%29.html

You have to remove the axle shafts to remove the bearings pointed to in your picture.

Once you get the old bearings out, they may have a number on them and you might be able to get them locally for a far better price than EZGO sells them.

09-01-2015, 11:36 AM	#23
JohnnieB Techno-Nerd Join Date: Jun 2011 Location: West Virginia Posts: 19,654	Re: Is my motor shot ?? Here is a link to the bearing indicated in the parts list Crash posted: https://shop.ezgo.com/products/Beari...286007%29.html You have to remove the axle shafts to remove the bearings pointed to in your picture. Once you get the old bearings out, they may have a number on them and you might be able to get them locally for a far better price than EZGO sells them.

Similar Threads
Thread	Forum
Controller is shot	Electric EZGO
My motor is shot.... what next...	Electric EZGO
I think my controller is shot	Electric EZGO
will 36v cc motor take a 48v "shot" occasionally	Electric golf carts

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum