lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 03-14-2016, 09:08 PM   #1
swerve77
Not Yet Wild
 
Join Date: Feb 2016
Posts: 15
Default New Controller & Solenoid Help

So I got most of my new controller and solenoid installed, along with new 2 gauge cables from the motor. However, I am kind of stuck on a couple of things.

Cart is a 1996 EZGO TXT DCS

1- The small diode. Does this go on the (-) connectors since the larger diode connects to the positive posts?

2 - I have these non-connected wires left. Struggling with where/how these are connected. FYI, the two red came off of the posts on the old solenoid.


As always, thanks in advance!
Attached Images
File Type: jpg WP_20160314_001.jpg (274.9 KB, 0 views)
swerve77 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 03-15-2016, 02:26 AM   #2
twistedglide
Getting Wild
 
twistedglide's Avatar
E-Z-GO
 
Join Date: Mar 2016
Location: South Louisiana
Posts: 84
Default Re: New Controller & Solenoid Help

You might find your answers here:

http://www.buggiesgonewild.com/elect...-diagrams.html
twistedglide is offline   Reply With Quote
Old 03-15-2016, 08:05 AM   #3
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,399
Default Re: New Controller & Solenoid Help

Look in the XCT operator manual page 14 for DCS carts.
The 2 red with large ring terminal go on the battery side of the solenoid.
The small red and yellow go together on one small post.
The small blue goes on the other small post.
The diode has a red end which goes on the the post with the yellow wire.
The big molex connector plugs into the matching receptacle in the control marked J1 on the DCS diagram pg 14
scottyb is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
What controller and need solenoid? Electric Club Car
EZ-GO 14v On Controller Solenoid Electric EZGO
Solenoid or Controller? Electric EZGO
dcs controller and solenoid Golf Carts and Parts
'99 EZ GO TXT Won't Run Solenoid/Controller? Electric EZGO


All times are GMT -5. The time now is 07:16 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.