|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-08-2016, 10:36 AM | #11 |
Not Yet Wild
Join Date: Mar 2016
Location: Lawndale, CA.
Posts: 32
|
Re: 01 TXT w PDS 3-2 code after new solenoid installed
Does the fact I can push the cart easily when the switch in the run position point to a speed sensor issue? I don't get an error code for that. What voltage should I be seeing on J3 1+2?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-08-2016, 11:18 AM | #12 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 01 TXT w PDS 3-2 code after new solenoid installed
Quote:
2. J3 goes to the Run/Tow switch. In Run, you should have full battery pack voltage on all 4 pins. In Tow, only two of the should have battery pack voltage on them. (It looks like pins 1 and 3 are the ones that will have voltage all the time and pins 2 and 4 are the switched legs.) |
|
04-08-2016, 01:45 PM | #13 |
Not Yet Wild
Join Date: Mar 2016
Location: Lawndale, CA.
Posts: 32
|
Re: 01 TXT w PDS 3-2 code after new solenoid installed
Ok. Run/tow switch has 28.9v on 1, and 38.9v on 4. Pack voltage is 38.9v.
|
04-12-2016, 11:18 AM | #14 |
Not Yet Wild
Join Date: Mar 2016
Location: Lawndale, CA.
Posts: 32
|
Re: 01 TXT w PDS 3-2 code after new solenoid installed
Sorry, make that 28.9 on 1 and 38.9 on 3. Pack voltage is 38.9.
|
04-12-2016, 01:07 PM | #15 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 01 TXT w PDS 3-2 code after new solenoid installed
Since the pack voltage is 38.9V, you're losing about 10V somewhere.
The voltage path starts at the solenoid's battery side large terminal, through the wiring harness to J1 Pin-5 and then through the controller to J3-Pin1. Is the voltage at J1 Pin-5 38.9V, or is it low also? What is the voltage at J3 Pin-1 in the controller when plug to Run/Tow switch is unplugged? If you are losing the 10V in the controller, the controller is most likely bad. |
04-12-2016, 03:28 PM | #16 |
Not Yet Wild
Join Date: Mar 2016
Location: Lawndale, CA.
Posts: 32
|
Re: 01 TXT w PDS 3-2 code after new solenoid installed
J1-5 is pack voltage, J3-1 socket is 28.9. Now to find a new controller. Thank you and ski-doo583 for your assistance, time and effort. It is much appreciated.
|
04-13-2016, 08:12 AM | #17 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: 01 TXT w PDS 3-2 code after new solenoid installed
The best option for PDS carts is the XCT400 from Alltrax. Get it with the SW180 solenoid in a pkg. deal
|
04-13-2016, 09:01 AM | #18 |
Not Yet Wild
Join Date: Mar 2016
Location: Lawndale, CA.
Posts: 32
|
Re: 01 TXT w PDS 3-2 code after new solenoid installed
This cart is stock and used by our security people on campus. They run it for an 8 to 12 hour shift driving on concrete. What are the advantages going to be installing the xct 400 with sw 180 solenoid?
|
04-15-2016, 08:47 AM | #19 |
Not Yet Wild
Join Date: Mar 2016
Location: Lawndale, CA.
Posts: 32
|
Re: 01 TXT w PDS 3-2 code after new solenoid installed
Can this cart be driven as it is until they decide to get us a new controller?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
EZGO PDS "welded solenoid" code | Electric EZGO | |||
Need Help, just installed new controller and solenoid | Electric EZGO | |||
Installed controller and solenoid now it won't charge | Electric Club Car | |||
01 Ez-go PDS 3/2 Beep code, Solenoid good | Electric EZGO | |||
For Sale Stock Precedent IQ Curtis Controller (speed code 4)and Solenoid | Golf Carts and Parts |