|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
07-24-2018, 10:44 PM | #1 |
Getting Wild
Join Date: Jun 2018
Posts: 103
|
Help with All Sport Super Sport 6in Install
Few questions on installing an All Sport Super Sport lift...finding the instructions a little lacking.
1) Which bolts does the thread locker need to go on? 2) How should I set the camber. Do the heim "bolts" need to be parallel to the ground? Should the top be further out than the bottom? 3) Once set, do I just use the bolt in combination with the insert (not washer)? 4) What is the best way to set the toe in/or verify it? How much toe-in is preferred? Thanks for the help y'all |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-25-2018, 06:45 AM | #2 |
Gone Wild
Join Date: Jan 2017
Location: Miami, FL
Posts: 1,061
|
Help with All Sport Super Sport 6in Install
1-spindle bolts
2-use framing square, tire should be perpendicular to the floor 3-see various threads on alignment, make sure you set camber first 4-I like 0 toe best on mine. Try 0 to 1/8” toe in and out to see what you like best. |
07-25-2018, 06:53 AM | #3 | |
Gone Wild
Join Date: Sep 2016
Posts: 515
|
Re: Help with All Sport Super Sport 6in Install
Quote:
|
|
|
|
Similar Threads | ||||
Thread | Forum | |||
all sports super sport DS lift kit install video? | Electric Club Car | |||
Super Sport 6 inch on a 96 CC DS | Lifted Golf Carts | |||
About to install an AllSport 6" Super Sport | Electric Club Car | |||
2003 cc ds super sport kit | Lifted Golf Carts | |||
a-arm vs super sport lift | Lifted Golf Carts |