Alltrax Absolute Throttle

[Sergio]

Originally Posted by sonofagunn

Does the custom throttle bypass the signal from a Club Car's microswitch? In other words, does it engage the solenoid as soon as throttle% > 0? Or does the microswitch still control that?

The micro-switch inside the MCOR is the "Foot Switch" input to the Controller, it does not directly control the solenoid in any Club Car Sepex cart.

If You by-pass that switch for whatever reason, You need to disable the "High Pedal Disable" setting in the Alltrax Software.

In this case You should also enable the "Relay Off at Zero Throttle" setting.

Of course this is for testing only and not recommended for safety reasons.

[sonofagunn]

Originally Posted by Sergio

The micro-switch inside the MCOR is the "Foot Switch" input to the Controller, it does not directly control the solenoid in any Club Car Sepex cart.

If You by-pass that switch for whatever reason, You need to disable the "High Pedal Disable" setting in the Alltrax Software.

In this case You should also enable the "Relay Off at Zero Throttle" setting.

Of course this is for testing only and not recommended for safety reasons.

Good to know, I have had issues with what I believe is the microswitch sticking, and was curious if this would be a good workaround.