Mot-a4

[Hit it like a champ]

Originally Posted by Sergio

Here You go, but you can not switch "Motor Maps", just the settings for each user mode:

http://www.buggiesgonewild.com/elect...ml#post1418792

Sergio
If you are not switching field maps you are changing things like full throttle in reverse, turbo,and so on. is this correct if so then its back to the 7144 for me.

[NoleFan4Ever]

The 3 positions allow you to customize your settings via the Alltrax Tool Kit. Example, with mine I have the default set to 0 amps and everything dialed down to 0 or minimum (theft protection). On the next setting I have 300 amps and 2500 rpm's (kiddie mode for the little ones) and the 3rd setting I have it maxed out for my controller and motor combination. So anything you can access within the tool kits' settings area you can adjust. The field maps are not accessible via the personality switch. They require a defined .txt file to be loaded that is specific to your Sepex motor. This is not available for Series motors.

[Jkerle]

Is this sheet a sticky?

Sent from my SM-G935V using Tapatalk

[Hit it like a champ]

Can I set this up to protect my motor in the winter with the big tires and in the summer with small tires.

[NoleFan4Ever]

You can run the Torque map when on big tires and the speed map when on small tires. The personality switch will not do the map changes. That is only with the tool kit, but only takes 5 minutes....

[Sergio]

Like NoleFan4Ever said, but running a lifted cart on 20" tires would not look good in my opinion.