2006 precedent no go at times

TahoeDawgZ71 · 12-12-2019, 05:09 PM

Sergio, we spoke on the phone and diagnosed it at a bad speed sensor. He said he was going to disable the speed sensor circuit within the software and see if it worked then. Then we'll know for sure.

Sergio · 12-12-2019, 09:18 PM

Thanks for updating the thread David, yeah the speed sensor is definitely important for the turbo option to function and get the best performance from the controller.

busman9 · 12-15-2019, 06:19 PM

I disabled the speed sensor and drove the cart,it did run faster but did not perform very well. I then rechecked the speed sensor and only 50% accel. I pushed the cart and did not have any beeps or resistance. I guess I will replace the sensor?

TahoeDawgZ71 · 12-15-2019, 08:26 PM

Quote:

Originally Posted by busman9

I disabled the speed sensor and drove the cart,it did run faster but did not perform very well. I then rechecked the speed sensor and only 50% accel. I pushed the cart and did not have any beeps or resistance. I guess I will replace the sensor?

What do you mean by "only 50% accel?"

But yes, if your speed sensor fails to show any RPMs in the Alltrax software when the speed limit is enabled, replace it.

busman9 · 12-16-2019, 08:07 PM

Dave, I tested the green wire from sensor to controller and it test good. I pulled the sensor and magnet off and notice on the magnet it has 4 little circles on it? Does that mean it is a 4 pole and not a 8 pole sensor and if so could that be causing the NO RPM signal? Just asking before I order a new sensor because before I replaced the controller I had the beep and brake resistance when I did the push test

12-12-2019, 05:09 PM	#41
TahoeDawgZ71 revolutiongolfcars.com Join Date: Mar 2010 Location: Golf Car Capital of The World... Augusta, Georgia Posts: 10,224	Re: 2006 precedent no go at times Sergio, we spoke on the phone and diagnosed it at a bad speed sensor. He said he was going to disable the speed sensor circuit within the software and see if it worked then. Then we'll know for sure.

12-12-2019, 09:18 PM	#42
Sergio Gone Wild Join Date: Sep 2012 Location: Charlotte, NC Posts: 9,329	Re: 2006 precedent no go at times Thanks for updating the thread David, yeah the speed sensor is definitely important for the turbo option to function and get the best performance from the controller.

12-15-2019, 06:19 PM	#43
busman9 Gone Wild Join Date: Jan 2011 Location: mascoutah,il Posts: 387	Re: 2006 precedent no go at times I disabled the speed sensor and drove the cart,it did run faster but did not perform very well. I then rechecked the speed sensor and only 50% accel. I pushed the cart and did not have any beeps or resistance. I guess I will replace the sensor?

12-16-2019, 08:07 PM	#45
busman9 Gone Wild Join Date: Jan 2011 Location: mascoutah,il Posts: 387	Re: 2006 precedent no go at times Dave, I tested the green wire from sensor to controller and it test good. I pulled the sensor and magnet off and notice on the magnet it has 4 little circles on it? Does that mean it is a 4 pole and not a 8 pole sensor and if so could that be causing the NO RPM signal? Just asking before I order a new sensor because before I replaced the controller I had the beep and brake resistance when I did the push test

Similar Threads
Thread	Forum
'13 Precedent - Sometimes will not go other times it will	Electric Club Car
precedent started then stopped several times today	Electric Club Car
08 Precedent alltrax controller blinking 5 times	Electric Club Car
how many times does my 07 precedent fire per revolution	Gas Club Car
Should I buy a 2006 CC Precedent	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum