Taylor Dunn VS Cushman EZ GO (opinions)

[rustyoldcar]

I am buying one of these carts ,
both are 2006 models, 36 volt electric.

Taylor Dunn B-248 36V GT
or
Cushman Titan 411 (EZ go I think makes it)

Any advice, one better than the other, parts available,
etc.?
I will be putting wider tires on the back and a large water
tank to water trees (2000 lbs or so)
Here are pics

[richie]

We have a taylor dunn water cart at work.I am not familiar with the other but ours works great with the tank on it.It is a 400 gallon tank but limited to 200 due to different operators and safety.Both would probably do the job.

[rustyoldcar]

Originally Posted by richie

We have a taylor dunn water cart at work.I am not familiar with the other but ours works great with the tank on it.It is a 400 gallon tank but limited to 200 due to different operators and safety.Both would probably do the job.

Does the cart at your work look about like one of these or is it bigger?
I need to find a tank about 200 gallons as well I guess to limit sloshing.
I found one that is 275, but has no baffles so it will probably slosh : )
When that thing is half full is it hard to drive?

[jackel440]

Taylor dunns seem to take the abuse really well in our plants.So do the cushmans.I have a taylor dunn at home ,and I wish it drove and road like the cushman.They have independent front suspension were as the Taylor dunn has a solid front axle.You seem to get alot of feed back through the steering on the TD than you do on the Cushman.
We carry portable welders and cutting tanks on them at work,and there is also some with the liquid pumper tanks mounted on them.