No output on 488 amp. controller

jhbluesman · 02-22-2009, 04:04 PM

I have a 96 ez-go, lifted, stock motor, 488 amp.controller, 4 ga. cables, and a up graded f/r. switch. It is dead in the water. I can't get any voltage reading out of controller that is 16 months old. I think it needs to be replaced. Got controller from buggies unlimited. I think it is a Curtis on a 1204 footprint. I would like to get it rebuilt if possible, or do I just need to bite the bullet and get a new one? Does anyone one have any suggestions? The motor runs in forward and reverse if I bypass controller.

02-22-2009, 04:04 PM	#1
jhbluesman Not Yet Wild Join Date: Feb 2009 Posts: 23	No output on 488 amp. controller I have a 96 ez-go, lifted, stock motor, 488 amp.controller, 4 ga. cables, and a up graded f/r. switch. It is dead in the water. I can't get any voltage reading out of controller that is 16 months old. I think it needs to be replaced. Got controller from buggies unlimited. I think it is a Curtis on a 1204 footprint. I would like to get it rebuilt if possible, or do I just need to bite the bullet and get a new one? Does anyone one have any suggestions? The motor runs in forward and reverse if I bypass controller.
jhbluesman Not Yet Wild Join Date: Feb 2009 Posts: 23

Similar Threads
Thread	Forum
charger voltage output for 48v CC	Electric Club Car
Generator output voltage?	Gas EZGO
850 Amp controller	Golf Carts and Parts
controller help	Electric EZGO
Need a pds controller	Golf Carts and Parts