|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
08-26-2008, 08:17 PM | #11 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: charger voltage output for 48v CC
I believe the CC OBC are all the same......Someone able to confirm or correct me? Controllers are very voltage and system specific. You could go for a controller w/ a bit more amperage but anything over 300 amps is a waste of $ unless you intend to go big on the other compinents and it doesn't sound as if that is your intention..... So a used obc and 48 volt regen controller might be had from another member for like ...about... anyone got some?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-26-2008, 09:01 PM | #12 |
Not Yet Wild
Join Date: Jul 2008
Location: St.Cloud, FL.
Posts: 14
|
Re: charger voltage output for 48v CC
must not all be the same,my OBC has a 6 pin plug and everything I've been seeing on ebay and web sites are 3 pin.
|
08-13-2009, 08:29 PM | #13 |
Not Yet Wild
Join Date: Aug 2009
Posts: 11
|
Re: charger voltage output for 48v CC
This thread is interesting, I also didn't know about motor change. Thanks
|
08-13-2009, 09:03 PM | #14 | |
Runnin' with Scissors
Join Date: Aug 2009
Location: In My Shop
Posts: 415
|
Re: charger voltage output for 48v CC
Quote:
The motor is called a "shunt" motor because the field is in parallel, or "shunts" the armature. The motor field windings for a series motor are in series with the armature. I had problems with a bunch of the regin I and regin II's and have done the conversion to series. Its a job, but worth it. In the end you will have a more reliable cart. |
|
08-15-2009, 11:33 AM | #15 | |
Gone Wild
Join Date: Jul 2009
Location: Nashville
Posts: 201
|
Re: charger voltage output for 48v CC
Quote:
|
|
08-15-2009, 01:22 PM | #16 |
Runnin' with Scissors
Join Date: Aug 2009
Location: In My Shop
Posts: 415
|
Re: charger voltage output for 48v CC
Don,t get me wrong though....I kinda like the IQ's...well...I'm building one, a 2006 CC, 48Volt, DCX600 Alltrax with the IQ adapter, 8:1 gear, 506:2 D&D Motor.
2009 CC NEW Build.jpg Anyways, cart runs really strong, pulls really hard too! Ramp is set high so it spins on pavement pulling off. Run's in the low 30'smph I'm guessing?? No speedo yet. Just having to work on them on a daily basis, I like the series carts better. |
|
|
Similar Threads | ||||
Thread | Forum | |||
charger voltage | Electric EZGO | |||
Generator output voltage? | Gas EZGO | |||
Low Voltage | Electric golf carts | |||
Wanted: multi voltage battery charger | Golf Carts and Parts |