lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 08-24-2015, 05:13 PM   #1
Stringzz
Not Yet Wild
 
Join Date: Sep 2014
Posts: 2
Default 2010 RXV Madjax Voltage Reducer Switched Output

I have a Madjax voltage reducer that I installed but I don't know where to wire the green wire to the 36/48 volt switched input from keyswitch.

When I looked at the keyswitch, it just had a wiring harness, and I didn't want to cut any wires.

Is there somewhere I can wire the switched input near the battery box?
Stringzz is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 08-24-2015, 07:21 PM   #2
HiTechRedNeck
Gone Wild
 
Join Date: Aug 2014
Location: Duncan Corners
Posts: 905
Default Re: 2010 RXV Madjax Voltage Reducer Switched Output

Quote:
Originally Posted by Stringzz View Post
I have a Madjax voltage reducer that I installed but I don't know where to wire the green wire to the 36/48 volt switched input from keyswitch.

When I looked at the keyswitch, it just had a wiring harness, and I didn't want to cut any wires.

Is there somewhere I can wire the switched input near the battery box?
Do NOT wire to keyswitch. This will damage/destroy controller -- a $1000+ mistake.

You can run a hot wire (fused) from battery positive through switch on dash to reducer enable.

You can also hook reducer to switched power lug of solenoid.

More help available if needed.

Again, DO NOT attempt to wire to keyswitch.
HiTechRedNeck is offline   Reply With Quote
Old 08-25-2015, 01:47 AM   #3
cgtech
Over This Interview Is...
 
cgtech's Avatar
Yamaha
 
Join Date: Jun 2012
Location: AZ
Posts: 17,449
Default Re: 2010 RXV Madjax Voltage Reducer Switched Output

He knows what to do, do it right & dont buy a new controller ($$ conversion). Just wire it to the large switched terminal on the solenoid. (i really gotta get a pic of the system with both solenoids, old solenoid is hard to find).
cgtech is offline   Reply With Quote
Old 08-25-2015, 09:29 AM   #4
Stringzz
Not Yet Wild
 
Join Date: Sep 2014
Posts: 2
Default Re: 2010 RXV Madjax Voltage Reducer Switched Output

Thanks HiTechRedNeck and cgtech for the great advice! Where is the solenoid and does anyone have a picture of it and the terminal i would hook up to?

Thanks again
Stringzz is offline   Reply With Quote
Old 08-25-2015, 03:10 PM   #5
jneubig
Gone Wild
E-Z-GO
 
Join Date: Aug 2012
Location: Houma, Louisiana
Posts: 950
Default Re: 2010 RXV Madjax Voltage Reducer Switched Output

I too would like to see a picture of the correct terminal. I am attaching a voltage meter and would like it switched.
jneubig is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
Where to mount voltage reducer on 2010 Precedent? Electric Club Car
Switched radio, constant memory with reducer Electric Club Car
Where to install ScottyB voltage reducer on 2010 Precedent Electric Club Car
MadJax 48v - 12v reducer locations Electric Club Car
2010 Electric RXV (Voltage Reducer) Electric EZGO


All times are GMT -5. The time now is 11:50 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.