|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-25-2021, 12:03 PM | #1 |
Not Yet Wild
Join Date: Dec 2020
Location: Conroe, Texas
Posts: 21
|
EZGo TXT PDS JUST CLICKS
I have a 2004 TXT/PDS 36 volt EZGo and the solenoid will only click when you push the accelerator pedal. I am trying to find a trouble shooting guide but haven’t been able to find one. The controller is a Curtis PMC 1206MX controller. I have replaced the solenoid and installed all new Trojan batteries which test good. Any help is greatly appreciated.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-25-2021, 03:01 PM | #2 |
Not Yet Wild
Join Date: Dec 2020
Location: Conroe, Texas
Posts: 21
|
Re: EZGo TXT PDS JUST CLICKS
So per Flight Systems Industrial Products trouble shooting guide :
J4Pin4 Must be between 13 and 16 volts - If not, remove ITS Sensor and measure again. If voltage increases to 13 to 16 volts with sensor removed, replace ITS Sensor I only have between 3 and 4 volts and nothing changed when I removed the sensor. Any ideas ? Controller ? |
01-25-2021, 04:30 PM | #3 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: EZGo TXT PDS JUST CLICKS
Measure between controller's B- terminal and J4 Pin-4 on controller with 4 pin cable to pedal box unplugged.
If you only get the 3 or 4 voltage, the controller is bad. Replace it with an Alltrax XCT48400-PDS (or larger) along with a suitable solenoid. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
99 ezgo txt 36v just clicks | Electric EZGO | |||
05 ezgo clicks but no go | Electric EZGO | |||
Solenoid clicks then clicks cart doesn't move | Electric EZGO | |||
99 ezgo clicks but will not go | Electric EZGO | |||
ezgo just clicks | Electric EZGO |