RXV Motor Brake Replacement Proceure

[yukonjoe74]

do you know the exact size of the 3 bolt needed to install the motor brake? i picked up cart that had motor brake removes and no bolts. i bought new brake but did not come with new screws. any help would be greatly appreciated. its a 2008 RXV and from what i understand once i put new brake on it i will never be able to release the brake if batteries are dead? can you confirm this? thanks again, Joe

[usgicollector]

3- Flanged Hex Head Screws M6- 1 x 60

3- Lock Washers Stainless Steel 1/4"

[usgicollector]

If your batteries are dead no you won't be able to release brake. But you can take brake off to be able to push the cart if needed.

[yukonjoe74]

Originally Posted by usgicollector

3- Flanged Hex Head Screws M6- 1 x 60

3- Lock Washers Stainless Steel 1/4"

Perfect! thanks for the quick response. you guys are awesome!

[Lees23]

I must ask.. why are all the extra steps needed? I unplugged mine, took the old one off and put the new one on.

[BobBoyce]

Originally Posted by Lees23

I must ask.. why are all the extra steps needed? I unplugged mine, took the old one off and put the new one on.

To make sure that it is installed propery so that it lasts... Proper alignment and not too much bolt torque permit it to work properly so that it has the longest service life. Otherwise it binds and wears out prematurely.