|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
06-24-2019, 03:35 PM
|
#1 |
|
Not Yet Wild
Join Date: Oct 2017
Posts: 20
|
EZGO PDS wires hot and stumble.
Ezgo Textron year unknown and the wires to the positive and negative posts from the controller are getting very hot after traveling approx. 1/2 mile. The wires going from battery to battery are not even warm. Also intermittently the cart stumbles, not sure if this is the motor brake or what. The cart had set up for approx. 2 years with old batteries. After replacing the batteries the cart would not do anything. Friend replaced what I think was the controller box which was located under the tow/run switch. Cart now works except for the hot wires and intermittent stumble/brake. Any suggestion as to why it is getting hot and stumble. Thanks for your help.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-24-2019, 04:03 PM
|
#2 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,860
|
Re: EZGO PDS wires hot and stumble.
Try a new solenoid ?
|
|
|
|
06-24-2019, 08:57 PM
|
#3 | |
|
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: EZGO PDS wires hot and stumble.
Quote:
|
|
|
|
|
|
06-28-2019, 04:55 PM
|
#4 |
|
Not Yet Wild
Join Date: Oct 2017
Posts: 20
|
Re: EZGO PDS wires hot and stumble.
PDS. Is it normal for the wires to get hot when running the cart a long distance wide open?
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| I hooked up main wires to batteries backwards, fried some wires, help??? | Electric EZGO | |||
| New Lifan 420 with lean stumble, stock exhaust and intake. | Clone Engine Swaps | |||
| Occasional stumble and kinda gassy | Gas Club Car | |||
Linear Mode
