Help with the beast!!!!

gladdengolfcarts · 10-15-2013, 03:12 PM

Last year I purchased a 700 amp controller (587) a motor (GL0-4001) and a foot pedal (484). All of these items were wired into an older cart running 35" tires (now 39"). Individual solenoids were used for foward and reverse along with a pds style foward and reverse rocker switch.

I now want these items placed in a different cart. The new cart is a 2000 ezgo non-pds cart. I want to use all of these components except the foot pedal. My question is can I wire the factory foot pedal on the ezgo to the GE controller which is 0-5k according to nivels website?

If this can be accomplished with out the foot pedal (484) by using the factory set up. What would be the wiring procedure to make it work?

All part numbers are Nivel part numbers

Sir Nuke · 10-15-2013, 03:27 PM

first off, what kind of cart is it now? as far was what type of drive system.....sepex or series?

gladdengolfcarts · 10-15-2013, 03:58 PM

Series sorry I left that out. My main concern is this. I want to use the factory foot pedal on the 2000 ezgo with all the components I listed. Then i want to use the after market foot pedal 484 with all the components off the 2000 ezgo. So basically I want to swap the entire drive system of both carts with each other, but leave the foot pedals that they already have on them.

scottyb · 10-15-2013, 04:32 PM

FSIP makes a throttle converter that will allow you to run the 0-5k control in the ITS cart. But you are out of luck going the other way with the stock ITS controller.

gladdengolfcarts · 10-15-2013, 04:41 PM

For some reason I thought the 484 foot pedal had an its throttle built into it. Am I completely off base with that?

gladdengolfcarts · 10-15-2013, 04:48 PM

Also do you have the FSIP part number?

scottyb · 10-15-2013, 07:41 PM

Google your peddle part number and answer your own question. Call FSIP and order the ITS throttle converter. I don't have a #.

10-15-2013, 03:12 PM	#1
gladdengolfcarts Not Yet Wild Join Date: Jul 2011 Location: Columbia, SC Posts: 21	Help with the beast!!!! Last year I purchased a 700 amp controller (587) a motor (GL0-4001) and a foot pedal (484). All of these items were wired into an older cart running 35" tires (now 39"). Individual solenoids were used for foward and reverse along with a pds style foward and reverse rocker switch. I now want these items placed in a different cart. The new cart is a 2000 ezgo non-pds cart. I want to use all of these components except the foot pedal. My question is can I wire the factory foot pedal on the ezgo to the GE controller which is 0-5k according to nivels website? If this can be accomplished with out the foot pedal (484) by using the factory set up. What would be the wiring procedure to make it work? All part numbers are Nivel part numbers

10-15-2013, 03:27 PM	#2
Sir Nuke Master of All Things Join Date: May 2013 Location: West Columbia, Texas Posts: 18,637	Re: Help with the beast!!!! first off, what kind of cart is it now? as far was what type of drive system.....sepex or series?

10-15-2013, 03:58 PM	#3
gladdengolfcarts Not Yet Wild Join Date: Jul 2011 Location: Columbia, SC Posts: 21	Re: Help with the beast!!!! Series sorry I left that out. My main concern is this. I want to use the factory foot pedal on the 2000 ezgo with all the components I listed. Then i want to use the after market foot pedal 484 with all the components off the 2000 ezgo. So basically I want to swap the entire drive system of both carts with each other, but leave the foot pedals that they already have on them.

10-15-2013, 04:32 PM	#4
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,866	Re: Help with the beast!!!! FSIP makes a throttle converter that will allow you to run the 0-5k control in the ITS cart. But you are out of luck going the other way with the stock ITS controller.

10-15-2013, 04:41 PM	#5
gladdengolfcarts Not Yet Wild Join Date: Jul 2011 Location: Columbia, SC Posts: 21	Re: Help with the beast!!!! For some reason I thought the 484 foot pedal had an its throttle built into it. Am I completely off base with that?

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

10-15-2013, 04:48 PM	#6
gladdengolfcarts Not Yet Wild Join Date: Jul 2011 Location: Columbia, SC Posts: 21	Re: Help with the beast!!!! Also do you have the FSIP part number?

10-15-2013, 07:41 PM	#7
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,866	Re: Help with the beast!!!! Google your peddle part number and answer your own question. Call FSIP and order the ITS throttle converter. I don't have a #.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
GE or AMD Beast	Electric EZGO
the beast motor	Extreme DC!
New belts for the beast	Gas EZGO
Beast Motor	Electric EZGO
The Beast	Members Rides