Vc 460

raydhd · 02-11-2017, 06:51 PM

Tomorrow the plan is to pull out my may of 2014 VC 460 of the G14 and put all the parts I have been amassing in it. Stay tuned. My first task will be how the NR racing shaft rockers line up. Along with that check out how the aussie speed valve cover works out with the stud holding it down in place of the bolt on the present valve cover. Then comes tearing the head down and putting in the comp cams valve springs.I may also look at fitment of the raceseng flywheel and coil bracket before opening the crankcase for the cam and billet rod replacement.

02-11-2017, 06:51 PM	#1
raydhd VC 460 CLONE GONE WILD Join Date: Oct 2014 Location: Ray BY The Bay NJ Posts: 10,647	Vc 460 Tomorrow the plan is to pull out my may of 2014 VC 460 of the G14 and put all the parts I have been amassing in it. Stay tuned. My first task will be how the NR racing shaft rockers line up. Along with that check out how the aussie speed valve cover works out with the stud holding it down in place of the bolt on the present valve cover. Then comes tearing the head down and putting in the comp cams valve springs.I may also look at fitment of the raceseng flywheel and coil bracket before opening the crankcase for the cam and billet rod replacement.