|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
08-10-2015, 08:11 PM | #11 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,633
|
Re: G1 getting hot after Umaxx spring install?
A two stroker is only going to get hot if it lean.IS the carb or air filter blocked? Is the exhaust system blocked? Is there an air leak in the crank seals or intake tract? There is not a whole else to make a two stroker run hot as you describe.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-10-2015, 08:25 PM | #12 |
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
Re: G1 getting hot after Umaxx spring install?
|
08-10-2015, 08:30 PM | #13 |
Not Yet Wild
Join Date: Apr 2014
Location: Sandystone NJ
Posts: 56
|
Re: G1 getting hot after Umaxx spring install?
I think its from runnin it for a long run at higher rpms cause it was fine till i did clutch spring. Has anybody ever tryed runnin a electric fan blowin air in to try to keep it cool? I was also thinking about taking the plastic cover off the head to let a little more heat out.
|
08-10-2015, 08:33 PM | #14 |
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
Re: G1 getting hot after Umaxx spring install?
|
08-10-2015, 08:35 PM | #15 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G1 getting hot after Umaxx spring install?
Taking the plastic cover off the motor is a sure way to overheat the motor, that shroud is installed to direct the cooling air past the head. Without it, less cooling air will pass directly through the cooling fins.
|
08-10-2015, 09:38 PM | #16 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,633
|
Re: G1 getting hot after Umaxx spring install?
|
08-10-2015, 09:44 PM | #17 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,633
|
Re: G1 getting hot after Umaxx spring install?
I just had a thought! How does the spark plug look?
|
08-11-2015, 05:16 AM | #18 |
Not Yet Wild
Join Date: Apr 2014
Location: Sandystone NJ
Posts: 56
|
Re: G1 getting hot after Umaxx spring install?
I will pull it out and check it when i get home. Wat do u guys think is the best bet for a tach for a G1
|
08-11-2015, 05:18 AM | #19 |
Not Yet Wild
Join Date: Apr 2014
Location: Sandystone NJ
Posts: 56
|
Re: G1 getting hot after Umaxx spring install?
Im not shur wat kind of rpms its turnin atleast with a tach i can keep my eye on it.
|
08-11-2015, 06:23 AM | #20 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,633
|
Re: G1 getting hot after Umaxx spring install?
any of the cheap digital ones on line or up market to the equus 8068.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Marathon leaf spring install help | Gas EZGO | |||
Got the Umaxx...build thread. | Gas Yamaha | |||
g16 power spring install help | Gas golf carts | |||
Rolling Cart after HD Spring install??? | Gas Yamaha | |||
speed spring install, need help | Gas Yamaha |