|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
02-05-2016, 07:05 PM | #1 |
Gone Wild
Join Date: Jun 2015
Location: NW Iowa
Posts: 1,669
|
G1 fly wheel nut
does anyone one know the size and thread pitch of the nut on the fly wheel side of the crank?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-07-2016, 02:16 PM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G1 fly wheel nut
90170-16425-00 is the part number for the nut. Some hardware can be "decoded" by the part number. The G1 service manual tells how to decode most hardware sizes by PN.
|
02-07-2016, 03:24 PM | #3 |
Gone Wild
Join Date: Jun 2015
Location: NW Iowa
Posts: 1,669
|
Re: G1 fly wheel nut
thanks for the part number but i dont own a service manual no one knows the size and thread pitch?
|
02-08-2016, 09:05 PM | #4 |
Gone Wild
Join Date: Jun 2015
Location: NW Iowa
Posts: 1,669
|
Re: G1 fly wheel nut
i think i figured it out a M16-1.0
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Wanted - Steering Wheel - Adaptor + Wheel | Golf Carts and Parts | |||
Lugnut, stud, rear wheel problem (wheel came off) | Lifted Golf Carts | |||
Rear Wheel Studs too Short for 3 inch wheel Spacer | Electric EZGO | |||
Harley 3 wheel front wheel seals | Gas Harley Davidson | |||
Alignment of Steering Wheel Only - Wheel Base Straight | Gas Yamaha |