|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-20-2017, 07:09 PM | #1 |
Getting Wild
Join Date: Apr 2016
Posts: 121
|
Governor bypass
I found most of my answer on the Sticky threads but wanted to ask what I do with the governor arm. I disconnected all throttle cables from the governor for the bypass. Does the governor arm just stay on the transmission or do I need to remove it also. G16 cart
Thank you |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-20-2017, 08:06 PM | #2 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: Governor bypass
You can let it flop, or you can remove the arm and leave the gov shaft to do what it wants!!
|
03-20-2017, 09:06 PM | #3 |
Getting Wild
Join Date: Apr 2016
Posts: 121
|
Re: Governor bypass
Thank you! I can't believe I waited this long to get rid of that thing.
|
03-20-2017, 11:54 PM | #4 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: Governor bypass
In doing so, don't over rev the motor, you can blow it up!! That also includes going down hill!!
|
03-21-2017, 07:38 PM | #5 |
Getting Wild
Join Date: Apr 2016
Posts: 121
|
Re: Governor bypass
How hard is it to install a tach?
|
03-21-2017, 10:06 PM | #6 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: Governor bypass
Me? Don't know, don't use one!! Use my ears!!
Not hard to install, other than where to mount it, but then you have to live with it!! Don't need it after about 5 minutes!! |
03-22-2017, 03:08 AM | #7 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Governor bypass
Easier solution, spring flip. Best speed while still having a governor. It's free, it works, it still closes the party down when you decide "I'm gonna go down that hill as fast as I can". Yeah, my carts dirty, I'll heat my burritos where I want, go eat a salad somewhere else. LOL!
|
03-22-2017, 06:39 AM | #8 |
Gone Wild
Join Date: May 2011
Location: Pittsburgh
Posts: 2,950
|
Re: Governor bypass
Spring Flip?
Hey cgtech, can you give a bit more information on how to do the spring flip? In looking at your pic I am not sure what's going on there. I was considering taking the governor off my G1 but, to be frank, too many people will be driving it other than me and my immediate family. I know the way people are when they are out of sight, especially if they have a couple of "sodas" in them. For their sake and for the cart's sake I don't want anyone racing around at 30 mph when I am not around. That said, I wouldn't mind something a bit faster than 15. This spring flip sounds interesting. |
03-22-2017, 07:54 AM | #9 |
Gone Wild
Join Date: Jun 2015
Location: NW Iowa
Posts: 1,669
|
Re: Governor bypass
On the g1 there's a Philips screw on the governor arm if you screw that all the way in it's gets you right about 15 16 mph no mods needed
|
03-22-2017, 09:57 AM | #10 |
Gone Wild
Join Date: May 2011
Location: Pittsburgh
Posts: 2,950
|
Re: Governor bypass
Yeah, I saw that. That's not the same thing as the spring flip is it?
It almost seems like gctech knows a little secret that I wouldn't mind knowing. |
|
|
Similar Threads | ||||
Thread | Forum | |||
governor bypass or replace governor cable | Gas Yamaha | |||
Bypass governor | Gas EZGO | |||
governor bypass | Gas Club Car | |||
84 G1 Best way to bypass Governor? | Gas Yamaha | |||
governor bypass | Big Block Talk! |