Voltage Reducer Help!

[Jmbeebe0722]

What pieces would I need to remove in order to see if I have a stock voltage reducer? Like I said, I have a stock light kit and harness currently. 2011 Precednt

[TahoeDawgZ71]

You don't have to remove anything. Crawl underneath the cart and look behind the front suspension. Between the front suspension and the back of the floorboard is a small metal cavity that the reducer fits into. It's stud mounted with two 1/4" flange nuts and has a wire running into the same small hole behind the dash that the pigtail for the front lights run into.

[Jmbeebe0722]

Okay, so I found it and in fact do have one. How do I tap into this to add the volt meter? They seem be wiring harnesses vs. plain wires to tap.

[TahoeDawgZ71]

Originally Posted by Jmbeebe0722

Okay, so I found it and in fact do have one. How do I tap into this to add the volt meter? They seem be wiring harnesses vs. plain wires to tap.

Depends whether it's a 16 to 12 v reducer or a 48v to 12v reducer. Post a pic

[Jmbeebe0722]

Originally Posted by TahoeDawgZ71

Depends whether it's a 16 to 12 v reducer or a 48v to 12v reducer. Post a pic

I will post a picture later tonight when I get home, but I do know that it read 48V to 10/12V on the label.

[Aflyer]

Jmbeebe0722,
Are you looking to add a volt meter to monitor your battery pack voltage?

If so there is a pair already in the dash to power the volt meter.

Aflyer

[Jmbeebe0722]

Originally Posted by Aflyer

Jmbeebe0722,
Are you looking to add a volt meter to monitor your battery pack voltage?

If so there is a pair already in the dash to power the volt meter.

Aflyer

That is exactly what I an looking for. I bought a volt meter to monitor the charge of the batteries.

Where can I find this pair and what would it look like?