|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
06-23-2017, 09:19 AM
|
#11 |
|
Not Yet Wild
Join Date: May 2013
Posts: 33
|
Re: G1 carb adjustments
So do you really have to purchase an entire carb just to get the small screw?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-23-2017, 01:11 PM
|
#12 |
|
Gone Wild
Join Date: Jun 2015
Location: NW Iowa
Posts: 1,669
|
Re: G1 carb adjustments
8 and 9 are what you need spend 20 on Chinese carb or 15 up to you
|
|
|
|
|
06-24-2017, 08:24 AM
|
#13 |
|
Gone Wild
Join Date: May 2011
Location: Pittsburgh
Posts: 2,943
|
Re: G1 carb adjustments
I think my point is that there is likely something wrong with your carb over and above the screw or the screw would never have been turned in so tightly to begin with. It's tough to say.
|
|
|
|
|
06-24-2017, 08:52 AM
|
#14 |
|
Not Yet Wild
Join Date: May 2013
Posts: 33
|
Re: G1 carb adjustments
Where did you find that page with the part numbers?
|
|
|
|
|
06-24-2017, 02:14 PM
|
#15 |
|
Gone Wild
Join Date: Jun 2015
Location: NW Iowa
Posts: 1,669
|
Re: G1 carb adjustments
|
|
|
|
|
06-24-2017, 02:23 PM
|
#16 |
|
Not Yet Wild
Join Date: May 2013
Posts: 33
|
Re: G1 carb adjustments
Thank you! This will be so helpful. I barbequed my muffler today for about 3 hours and I think I will be needing a replacement. The small skinny pipe that goes to a hose on the engine broke off at the base where it's welded on to the main body of the exhaust.
|
|
|
|
|
06-24-2017, 02:23 PM
|
#17 |
|
Not Yet Wild
Join Date: May 2013
Posts: 33
|
Re: G1 carb adjustments
I've seen on here where people make references to where they will but another one but I'm not sure what the website is.
|
|
|
|
|
06-24-2017, 02:42 PM
|
#18 |
|
Not Yet Wild
Join Date: May 2013
Posts: 33
|
Re: G1 carb adjustments
Uh. Nevermind. I looked up the part numbers on that and it goes for between 350 and 500 dollars
|
|
|
|
|
06-24-2017, 03:21 PM
|
#19 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G1 carb adjustments
Without that tube, your oil auto mixer will no longer function properly, time to weld it back on, or mix your oil in your fuel from this day forward (including what's in the tank now). I suggest mixing your oil.
|
|
|
|
|
06-24-2017, 04:05 PM
|
#20 |
|
Not Yet Wild
Join Date: May 2013
Posts: 33
|
Re: G1 carb adjustments
I don't have a welder. Is there any type of compound that I can use on it?
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Yamaha g1 carb adjustments | Gas Yamaha | |||
| Carb Adjustments? | Gas EZGO | |||
| G2 carb adjustments | Gas Yamaha | |||
| G9 Carb work? Adjustments | Gas Yamaha | |||
| 1989 Yamaha G2 carb adjustments | Gas Yamaha | |||
Linear Mode
