|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
07-14-2017, 05:09 PM | #1 |
Getting Wild
Join Date: Jan 2012
Location: Table Rock Lake Missouri
Posts: 94
|
Building another G16
I ordered a set of 12 inch wheels with 23 inch tires, Jakes 5 inch lift kit, headlight kit etc.
The wheels and tires came in today and I am a little concerned about the weight/mass on whether my little 10hp G16 will manage them? Opinions? I have already done the clutch spring thing in the back a few years ago from learning that process on here. I have also put a new centrifical drive pully on the motor. The cart runs great thanks to a lot of help on here, but was getting to be pretty humble looking. I had added a back seat and windshield, all of which is going to come apart now totally for the repaint to "Sassy Grass Green" similar to the Dodge Challenger color. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-14-2017, 09:38 PM | #2 |
Getting Wild
Join Date: Dec 2015
Posts: 111
|
Re: Building another G16
I have same size wheels and off road tires. 6" lift here. No issues at all. so far after 1.5 years of my abuse its been fine.
|
07-15-2017, 06:51 AM | #3 | |
Getting Wild
Join Date: Jan 2012
Location: Table Rock Lake Missouri
Posts: 94
|
Re: Building another G16
Quote:
I appreciate your help! |
|
07-15-2017, 06:32 PM | #4 |
Getting Wild
Join Date: Dec 2015
Posts: 111
|
Re: Building another G16
Check the PSI on them. Here when we Took them out of box they had 40 psi. Which is way over kill. I run 8 psi in them.
|
07-15-2017, 10:07 PM | #5 |
Getting Wild
Join Date: Jan 2012
Location: Table Rock Lake Missouri
Posts: 94
|
Re: Building another G16
More good information, thanks. Yes I have ran into that before as I think they do it to make sure the tire seats against the rim and doesn't leak.
|
07-24-2017, 05:49 PM | #6 |
Getting Wild
Join Date: Jan 2012
Location: Table Rock Lake Missouri
Posts: 94
|
Re: Building another G16
I finally got a chance to get started on the cart today.
I use mine daily, so it is real hard to take it out of commission. It is pretty darn fast now without the top, windshield and back seat. |
07-26-2017, 05:43 PM | #7 |
Getting Wild
Join Date: Jan 2012
Location: Table Rock Lake Missouri
Posts: 94
|
Re: Building another G16
Busted my tail today in 100 degree heat.
|
07-26-2017, 05:44 PM | #8 |
Getting Wild
Join Date: Jan 2012
Location: Table Rock Lake Missouri
Posts: 94
|
Re: Building another G16
New Challenger Green
It wont let me post a green picture. Guess I don't have enough posts or something. It sure is fast, peels out right now it is so light. |
07-27-2017, 07:10 PM | #9 |
Getting Wild
Join Date: Jan 2012
Location: Table Rock Lake Missouri
Posts: 94
|
Re: Building another G16
well it is pretty much done
|
07-29-2017, 09:28 AM | #10 |
Gone Wild
Join Date: Nov 2011
Posts: 232
|
Re: Building another G16
I really like that color, very nice looking cart !
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Building a 72v cart | Electric EZGO | |||
I'm building one faster than my last one! | Design Center | |||
building me a new ride | Members Rides | |||
Building a 02 TXT | Gas EZGO |