11-13-2018, 05:48 PM | #1 |
Not Yet Wild
Join Date: Oct 2018
Posts: 3
|
Shift adjustment
How do I correctly adjust the shifter cable on a 94 ds
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-13-2018, 06:20 PM | #2 |
Gone Wild
Join Date: Oct 2009
Location: Lee County, Georgia
Posts: 521
|
Re: Shift adjustment
ADJUSTMENT OF THE FORWARD AND REVERSE SHIFTER CABLE
With the shifter lever of the transmission in neutral (straight up), the forward and reverse handle should be straight up. For minor adjustments, the nut may be loosened and the ball joint rotated in the proper direction to get the proper adjustment. For major adjustments, the cable retaining nuts must be loosened and adjusted. When the cable is properly adjusted, with the forward and reverse handle in the neutral (straight up) position, the shift lever of the transmission will be in the neutral (straight up) position Caution: BE SURE THREADS OF CABLE ARE ENGAGED IN BALL JOINT AT LEAST .25 INCH (6.35 MILLIMETERS). IF BALL JOINT COMES LOOSE FROM THE CABLE, THE FORWARD AND REVERSE SHIFTER WILL NOT OPERATE PROPERLY. (This was copied and pasted from a 95-96DS Maintenance/Service Manual) |
11-13-2018, 09:11 PM | #3 |
Not Yet Wild
Join Date: Oct 2018
Posts: 3
|
Re: Shift adjustment
Thanks for the information
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Shift Cable or F&R Cable Adjustment | Gas Yamaha | |||
G9 shift cable adjustment | Gas Yamaha | |||
F/R shift arm | Golf Carts and Parts | |||
ezgo shift cable adjustment? | Gas EZGO | |||
shift eez | Gas Yamaha |