92 Differential stripped gear or shear pin

[p122654]

I have a 92 Electric EZ-GO that was doing just fine then stripped a gear or a shear pin in the differential. Lifted driver side and spun tire, with motor off, could grab driven gear and stop it but tire kept spinning. I could hear that there was a gear nashing sound, similar to when the motor tried to turn the wheel. Lifted passenger side and spun tire, same thing, could grab driven gear and tire could still turn. Hope for an easy fix. Are there any drawings of what is inside? My parts manual does not break it down.

I see that there are INPUT SHAFT FOR E-Z-GO ELECTRIC 1991-94 & 1994-UP WITH 21 TOOTH GEAR INPUT SHAFT parts available. Just guessing it is probable cause. Anyone replaced one of those before?

[cgtech]

Take the pan off the bottom, inspect. Unless you like just blindly buying parts you don't know you need.

Here's a diagram of a Yamaha axle, it's made by Dana, just like the ezgo axle.

[p122654]

Thanks are the P/N the same? And are they available? Can you include the list?

[cgtech]

Probably not all the same. There were 21 and 22 tooth input shafts (with slightly different gear ratio). This was just for reference of what parts were to be found in there.