lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
 
Thread Tools Display Modes
Old 01-17-2010, 09:02 AM   #1
lady bug
Gone Wild
 
lady bug's Avatar
Yamaha
 
Join Date: Nov 2009
Location: mi
Posts: 766
Default project G8

does anyone know what type of tool i should use for honing i have one of the big three jaw honing tools but was wondering if i should use a dingle berry type lol
lady bug is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 01-17-2010, 09:17 AM   #2
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 71,979
Default Re: project G8

I'm gonna go out on a limb here and say that honing is passe. Machinists leave a cross hatched pattern in the walls for dual purpose. Most importantly the motor oil hangs in grooves and lubricates the rings as needed ..... Are you just reringing an old piston?
scottyb is offline   Reply With Quote
Old 01-17-2010, 09:21 AM   #3
Flintrock
Raised by coyotes
 
Flintrock's Avatar
Yamaha
 
Join Date: Nov 2008
Location: Central Texas
Posts: 5,652
Default Re: project G8

Most of the automotive spring-loaded with stones are just too big for these smaller bores. There are some brake cylinder hones that will fit. If your's will fit using it with a finer stone should be OK. The flex hones are easy to use and give a good finish, especially if you didn't bore the cylinder. Either way be sure to wash with hot soapy water real good when done, and then clean again with a lint free cloth and WD-40 or some ATF.
Flintrock is offline   Reply With Quote
Old 01-17-2010, 09:22 AM   #4
Flintrock
Raised by coyotes
 
Flintrock's Avatar
Yamaha
 
Join Date: Nov 2008
Location: Central Texas
Posts: 5,652
Default Re: project G8

Hey, one more Scotty!!!
Flintrock is offline   Reply With Quote
Old 01-17-2010, 04:18 PM   #5
lady bug
Gone Wild
 
lady bug's Avatar
Yamaha
 
Join Date: Nov 2009
Location: mi
Posts: 766
Default Re: project G8

ok thanks i just got done maching the head 30 thousands and did some port work excited to get some pics up here
lady bug is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
my project g2 Members Rides
My project cc 83 Lifted Golf Carts
need new project Electric EZGO
EZ GO Project Big Block Talk!


All times are GMT -5. The time now is 10:08 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.