|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
05-08-2012, 04:36 PM | #1 |
Not Yet Wild
Join Date: May 2012
Posts: 3
|
G2 belt slipping under load
I have a Yamaha G2 gas and the belt is slipping and making a horrible squell/roar under load. Mainly happens when going uphill. It just started this yesterday when climbing a hill. I can make it happen in the driveway by holding down the gas and revving it up. I have a video of it but cannot figure out how to add it. I will search the threads to figure it out and repost it. the belt from the primary to secondary sheave seams crazy loose. I do not know how this can happen randomly though. i do have a few manuals and want to try and fix it myself. Our last golf cart did this same thing and the mechanic that fixed it said he replaced the clutch weights. I do not see how that is the fix though. Thank you for any help and i will post the video ASAP. Love the site and this is the first time i have cannot find my answer.
Thank you, Mason |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-08-2012, 09:45 PM | #2 |
Gone Wild
Join Date: Jun 2009
Location: ozarks
Posts: 237
|
Re: G2 belt slipping under load
well, first i'dd check that little cable attached to the engine and frame, then your motormounts , and measure the belt width, it should be no thinner than 27mm.
|
05-08-2012, 09:48 PM | #3 |
Not Yet Wild
Join Date: May 2012
Posts: 3
|
Re: G2 belt slipping under load
No clue what cable you are talking about. I will check the other two tomorrow. Thanks!
|
05-08-2012, 10:08 PM | #4 |
Gone Wild
Join Date: Jan 2008
Location: Covington, TN
Posts: 1,942
|
Re: G2 belt slipping under load
My guess would be the rear clutch circlip has broke and the spring seat/helix is rubbing the axle housing.
|
05-08-2012, 10:16 PM | #5 |
Not Yet Wild
Join Date: May 2012
Posts: 3
|
Re: G2 belt slipping under load
That was my guess from reading other posts but I cannot find the part on the diagram. Is that the official name circlip? Thanks for the help
|
05-08-2012, 10:16 PM | #6 |
Gone Wild
Join Date: Jun 2009
Location: ozarks
Posts: 237
|
Re: G2 belt slipping under load
|
05-08-2012, 10:40 PM | #7 | |
Gone Wild
Join Date: Jan 2008
Location: Covington, TN
Posts: 1,942
|
Re: G2 belt slipping under load
Quote:
It would go on before the spring seat. Part 5 http://www.boswellsgolf.com/pages/Oe...AJ-LATE_-_1993) Use a input shaft spacer instead of circlip if that is the problem. |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Belt slipping | Gas EZGO | |||
Belt slipping | Gas EZGO | |||
G22 Belt slipping | Gas Yamaha | |||
belt slipping | Gas Yamaha | |||
belt slipping when wet. | Gas Yamaha |