|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
05-30-2012, 06:02 PM
|
#1 |
|
Not Yet Wild
Join Date: May 2012
Posts: 22
|
Steering-rod flip after lift...
Does the spindle steering-arm have a tapered-hole in it?? I want to re-located the joint to the top, I don't like the angle.......If it's tapered like most, what's the fix??
 |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-30-2012, 07:06 PM
|
#2 |
|
Not Yet Wild
Join Date: Jan 2012
Posts: 35
|
Re: Steering-rod flip after lift...
It's tapered. You can flip it. Use an oversize drill bit and drill part ways through the arm from the top down. Seems like it was 1/4" to 5/16" deep. It creates a shoulder in the hole that will allow the taper to fit from the top. That is what the instructions from the 4" economy lift kit I installed said to do. If I still had the instructions I could be much more specific. Sorry. :( Maybe someone has the instructions???
|
|
|
|
|
05-30-2012, 09:34 PM
|
#3 | |
|
Not Yet Wild
Join Date: May 2012
Posts: 22
|
Re: Steering-rod flip after lift...
Quote:
|
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 2001 lift with old style steering | Electric EZGO | |||
| Big lift steering? | Lifted Golf Carts | |||
| lift and steering | Gas Yamaha | |||
| Steering HARD after lift | Gas Club Car | |||
| Lift kit, steering mods? | Lifted Golf Carts | |||
Linear Mode
