|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
09-17-2012, 08:20 AM
|
#1 |
|
Not Yet Wild
Join Date: Feb 2012
Location: Central Missouri
Posts: 74
|
88 Marathon 2PG Connecting Rod Bearing
So I am back to work on the Marathon. I had put it away because I had some money issues but now I am back up and ready to getr done. I am getting ready to order my parts for the rebuild on the engine and I noticed that I have play in my connecting rod lower bearing at the crankshaft. It does not have play straight up and down but it slides back and forth and you can kinda tilt it back and forth. Do I need to replace and if so is there a place I can purchase that bearing so that I dont have to buy the entire crankshaft assembly? Thanks, Craig
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-18-2012, 12:22 PM
|
#2 |
|
no clue
 Join Date: Sep 2009
Location: spicewood, texas
Posts: 3,308
|
Re: 88 Marathon 2PG Connecting Rod Bearing
you can't replace that bearing, but if there is no up or down play you are fine. stock ones have a bit of side play so they will self align. good luck!
 |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| g1 connecting rod pin | Gas Yamaha | |||
| G9/ J28 connecting rod specs. | Gas Yamaha | |||
| **HELP** WTB Top connecting rod needle bearing for 89 | Golf Carts and Parts | |||
| G1 connecting rod removal | Gas Yamaha | |||
| G16 connecting ROD | Golf Carts and Parts | |||
Linear Mode
