2011 RXV quit and brake engaged

[RAH]

2011 RXV 48 volt. Batteries were full charged, went about 1/4 mile and lost power. Electric brake engaged when it stopped. Turned key off and on a few times, charge indicator turned on, reverse buzzer sounds but doesn't move. Turned run/tow switch to tow, electric brake still wouldn't disengage. Bypassed brake following instructions under plastic cover. Pushed it home and realized when I turn key to F/R solenoid clicks twice. Charge indicator full charge and even topped it off with QE charger. Changed solenoid, still two clicks and no power. Checked all battery connections and wires I could and everything seems tight and in order. Had this thing two months, no warranty. Anyone have any suggestions for a first time owner. Thanks

[Jerj7907]

Inspect the motor brake. Three bolts to remove and electric connection.

[cgtech]

The second click was the solenoid disengaging, something failed the startup test. These are pretty intimidating to troubleshoot without the programmer. Search this site for "rxv trouble codes danaher controller" , it has test procedures for everything that can be tested without a engineering degree and tools that are not for sale to the public.

[RAH]

Thank you all. It beat me down and I took it to dealer to put on programmer. Waiting for the phone call to tell me how many thousands of dollars it will take to repair!!!

[HiTechRedNeck]

Please post results == my bet== parking brake