|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
08-11-2014, 09:03 AM
|
#1 |
|
Getting Wild
Join Date: Aug 2014
Location: indiana
Posts: 77
|
newbie with ezgo question
i just picked up a 92 ezgo marathon,, it had the motor replaced with a robin 2 cylinder motor (2 cylinders not 2 stroke, but it might be 2-stroke an not 4-stroke?) from either another golf cart or something. model # of robin motor is FH28C. problem is it has very low compression an will not start, it is getting a spark on both cylinders. anyone got any info on these motors and a good place to buy rebuild kits?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-11-2014, 09:47 AM
|
#2 |
|
Gone Wild
 Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: newbie with ezgo question
Look here for some info and I would check the valve clearances..
http://www.buggiesgonewild.com/ezgo-gas-tech/ |
|
|
|
|
08-12-2014, 10:58 AM
|
#3 |
|
Getting Wild
Join Date: Aug 2014
Location: indiana
Posts: 77
|
Re: newbie with ezgo question
well checked valves, they were good, pulled spark plugs, both sparking, then i looked down inside cylinders an pass side piston moving up an down, driver side not moving at all!! ooooo looks like connecting rod problems. rebuild in store or just replace motor.
|
|
|
|
|
08-12-2014, 11:07 AM
|
#4 |
|
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: newbie with ezgo question
All depends on how much damage is done and how handy you are.. Lots of folks are replacing with clone motors..
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Newbie question | Electric Club Car | |||
| Newbie with a value question | Gas Yamaha | |||
| Newbie question | Electric Club Car | |||
| newbie question | Big Block Talk! | |||
| Another newbie question | Gas EZGO | |||
Linear Mode
