11-13-2018, 02:24 PM | #1 |
Not Yet Wild
Join Date: Oct 2018
Posts: 2
|
No spark
I have a ezgo shuttle with a two cylinder 350cc engine. it stoped running and I have no spark. I changed the ignighter first and the coil and plugs also. I still have no spark. I have varified with my fluke meter a good ground and power at the coil when I hit the peddle and the engine turns over. Still wont start. any ideas?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-02-2018, 11:21 AM | #2 | |
Not Yet Wild
Join Date: Dec 2015
Posts: 16
|
Re: No spark
Quote:
|
|
12-02-2018, 02:33 PM | #3 |
Vintage tech
Join Date: Sep 2009
Location: South
Posts: 3,216
|
Re: No spark
Pulsers normally don't go bad. Check it with a meter set on the AC scale . I set mine on 2 volts. Unplug the connection where pulser goes to engine. Connect leads to each wire and spin it over. You should see around 1/4 volt AC on your meter.
|
12-04-2018, 07:15 PM | #4 |
Not Yet Wild
Join Date: Dec 2015
Posts: 16
|
Re: No spark
Mine was worn to almost flush... I replaced it, the coil and the igniter and I cannot get spark either.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G11 weird no spark slight spark | Gas Yamaha | |||
1980 ezgo gas SPARK/NO SPARK | Gas EZGO | |||
1994 club car no spark / then spark | Gas Club Car | |||
88 marathon new 79 dodge coil little spark then no spark? | Gas EZGO | |||
spark then no spark 97 4 stroke 2 cycl. | Gas EZGO |