|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-17-2019, 08:32 AM | #1 |
Not Yet Wild
Join Date: Jun 2019
Posts: 11
|
EH29C Carburetor Rebuild Kit
In my journey to get my '94 EZGO GXT804D up and running, I had to do something about the carburetor.
I ended up buying an import carb for $20 because I could not for the life of me find a rebuild kit for the stock carb on the EH29C motor. Can anyone point me in the right direction? I'd like to rebuild the one I have to keep on the shelf. Thanks, Matt |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-17-2019, 09:02 AM | #2 |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,690
|
Re: EH29C Carburetor Rebuild Kit
What exactly is wrong with it? Really the only parts you should need to replace will be the bowl gaskets. The jets and everything else should clean out without having to replace them.
I'd recommend cleaning your OEM carb really well and use the chinese one for gaskets and stuff. If there's something that is too far gone to clean (small jet) then you can get everything here. https://shop.txtsv.com/shop-ezgo/par...icle_year=1628 |
06-17-2019, 10:43 AM | #3 |
Not Yet Wild
Join Date: Jun 2019
Posts: 11
|
Re: EH29C Carburetor Rebuild Kit
This thing was sitting about 10 years at least. The float and valve are completely rusted and seized. Usually when I rebuild a motor like this, I can buy a rebuild kit that comes with all the jets, float valve pin, spring and seat. I would clean everything, reassemble and be off and running. Not a big job if you can find the parts....but dang those prices are steep compared to buying an import carb. I think I'll just run it with the import carb and fix this one if I ever need to. I can probably salvage what is there except for the bowl gasket. Thanks for the link.
|
06-17-2019, 11:45 AM | #4 |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,690
|
Re: EH29C Carburetor Rebuild Kit
hopefully the chinese carb works for you. occasionally you'll find someone that gets lucky, but 99% of the time they run pig rich, hesitate, flood, etc. Maybe you're the lucky one! Generally speaking, they cause more problems than they fix and even if the engine runs, it doesn't run right like it should.
good luck! FYI if it comes down to it, you can still get brand new OEM carbs for $175. But I don't know for how much longer, most parts for these things seem to be getting harder and harder to find. https://shop.txtsv.com/carburetor-as...90-jet-pre-mci |
06-17-2019, 02:57 PM | #5 |
Not Yet Wild
Join Date: Jun 2019
Posts: 11
|
Re: EH29C Carburetor Rebuild Kit
Hey where do those two rubber hoses go? The old carb only had 1 and it wasn't connected.
Matt |
06-17-2019, 03:04 PM | #6 |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,690
|
Re: EH29C Carburetor Rebuild Kit
the 2 hoses in the picture? I believe those are just vent lines
|
05-14-2020, 05:33 PM | #7 |
Not Yet Wild
Join Date: May 2020
Posts: 6
|
Re: EH29C Carburetor Rebuild Kit
Any luck on ever finding the bowl gasket for the original carb. I'm in the same situation...had entire thing done and as I was reassembling it I went to wipe off gasket and it broke...any help would be much appreciated
|
07-15-2020, 11:08 AM | #8 |
Not Yet Wild
Join Date: Jun 2010
Posts: 19
|
Re: EH29C Carburetor Rebuild Kit
I am looking for a gasket as well, any luck?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Recommended Carburetor Rebuild Frequency? | Gas Club Car | |||
eh29c rebuild | Gas EZGO | |||
eh29c | Gas EZGO | |||
Carb rebuild help for EH29C Robin Engine | Gas EZGO | |||
Robin eh29c | Gas EZGO |