03-27-2020, 07:17 PM | #1 |
Not Yet Wild
Join Date: Jul 2019
Location: SE USA
Posts: 11
|
Belt question
Have a belt question on my gas Ez-go.
Cart came with a belt 0.9” wide (no readable pt#) Goes 16-18 MPH (pretty fast) but the belt is a bit “loose”. Clutch shifts ok but the belt sits about 1” below the OD on the rear clutch. Pic attached. Bought the factory belt 27077-01 which is 1.25” wide and it sits flush with the rear clutch OD. Now the cart is really slow and the rear clutch does not “shift”. I think the belt is just sitting up there on the OD. Any ideas? Thanks in advance! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-27-2020, 07:24 PM | #2 |
Not Yet Wild
Join Date: Jul 2019
Location: SE USA
Posts: 11
|
Re: Belt question
0.9” belt
https://www.youtube.com/watch?v=EuTogIg8L1M New belt doesn’t shift at all, just rides near top edge. |
03-27-2020, 07:39 PM | #3 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: Belt question
The belt you have on there is for the early 4 stroke carts. 1-3/16" x 40-3/4"O.D Yours needs 72054G01 1 1/8 x 42.
|
03-28-2020, 07:28 PM | #4 |
Not Yet Wild
Join Date: Jul 2019
Location: SE USA
Posts: 11
|
Re: Belt question
I think I need a narrower belt? To engage the rear pulley?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Belt question | Gas EZGO | |||
Belt question | Gas Yamaha | |||
belt question.. | Big Block Talk! | |||
93 cc belt question | Gas Club Car | |||
belt question | Gas Club Car |