2001 villager 48v lighting circuit

stevep90 · 07-01-2009, 11:51 PM

Does anyone have a schematic for this. Found 4 fuses all OK strange have 32 V at tail lights and no ground when I ground still no light. It all started pulling the cart off a trailer the tail light got crushed and grounded out. Short is now clear but no lights. Is there something stepping voltage down to 12v, I see a wire tapped on secound to last battery not sure what it supplies.
Also my be a dumb question but there is a floor swich (like an old style hi beam low beam location) what is that for Hrrn? it does not do anything as well.
Appreciate any help on this guys.
Thanks Steve

butterface · 07-02-2009, 06:11 AM

There should be a voltage reducer in there somewhere, but sometimes you hear of people installing the lights off of two 8 volt batteries (for 16 volts to the lights) instead of doing it properly with a reducer.

Make sure when you hook everything back up that you DO NOT ground anything to the frame!!!! Very important to not ground to the frame on an electric cart.

The floor button is the horn.

Did you completely trace the wiring all the way through the cart?

Hopefully someone else will be along with some insight.

stevep90 · 07-02-2009, 10:46 AM

Have not traced yet will do that today. There is no wire tapped into second / 16 v battery.
Thanks for the heads up on frame grounding.
Anyone know what the voltage reducer looks like and or location?
Thanks for the help
Steve

pjshane · 07-04-2009, 05:50 AM

The voltage reducer on my cart looks like this:

stevep90 · 07-05-2009, 01:53 PM

Thanks PJShane. I appreciate the time.
Steve

07-01-2009, 11:51 PM	#1
stevep90 Not Yet Wild Join Date: Jun 2009 Posts: 8	2001 villager 48v lighting circuit Does anyone have a schematic for this. Found 4 fuses all OK strange have 32 V at tail lights and no ground when I ground still no light. It all started pulling the cart off a trailer the tail light got crushed and grounded out. Short is now clear but no lights. Is there something stepping voltage down to 12v, I see a wire tapped on secound to last battery not sure what it supplies. Also my be a dumb question but there is a floor swich (like an old style hi beam low beam location) what is that for Hrrn? it does not do anything as well. Appreciate any help on this guys. Thanks Steve
stevep90 Not Yet Wild Join Date: Jun 2009 Posts: 8

07-02-2009, 06:11 AM	#2
butterface Getting Wild Join Date: Jan 2009 Location: Oxford, FL Posts: 123	Re: 2001 villager 48v lighting circuit There should be a voltage reducer in there somewhere, but sometimes you hear of people installing the lights off of two 8 volt batteries (for 16 volts to the lights) instead of doing it properly with a reducer. Make sure when you hook everything back up that you DO NOT ground anything to the frame!!!! Very important to not ground to the frame on an electric cart. The floor button is the horn. Did you completely trace the wiring all the way through the cart? Hopefully someone else will be along with some insight.

07-02-2009, 10:46 AM	#3
stevep90 Not Yet Wild Join Date: Jun 2009 Posts: 8	Re: 2001 villager 48v lighting circuit Have not traced yet will do that today. There is no wire tapped into second / 16 v battery. Thanks for the heads up on frame grounding. Anyone know what the voltage reducer looks like and or location? Thanks for the help Steve
stevep90 Not Yet Wild Join Date: Jun 2009 Posts: 8

07-05-2009, 01:53 PM	#5
stevep90 Not Yet Wild Join Date: Jun 2009 Posts: 8	Re: 2001 villager 48v lighting circuit Thanks PJShane. I appreciate the time. Steve
stevep90 Not Yet Wild Join Date: Jun 2009 Posts: 8

Similar Threads
Thread	Forum
2001 Villager Rack and Pinion repair or replace	Electric Club Car
Lighting up an '07 Precedent	Electric Club Car
98 EZGO and lighting problem	Electric EZGO
LED lighting question	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum