|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
10-21-2014, 01:44 PM | #1 |
Not Yet Wild
Join Date: Sep 2014
Location: california
Posts: 42
|
yamaha g1 rebuild top end
only have 92 compression on my 1980 Yamaha was told not enough so here I go what will I need to do the job were to buy parts . what tool will I need . need help
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-21-2014, 02:08 PM | #2 |
Gone Wild
Join Date: Oct 2010
Location: Pittsburgh Pa
Posts: 1,551
|
Re: yamaha g1 rebuild top end
Click on SITE SPONSORS on top of the page. Buy from one of them. Make sure you get it as a kit. Everything you need will be in there.
|
10-21-2014, 02:10 PM | #3 |
Not Yet Wild
Join Date: Sep 2014
Location: california
Posts: 42
|
Re: yamaha g1 rebuild top end
thank you can I go with a bigger piston or stay stock
|
10-21-2014, 02:14 PM | #4 |
Gone Wild
Join Date: Oct 2010
Location: Pittsburgh Pa
Posts: 1,551
|
Re: yamaha g1 rebuild top end
|
10-21-2014, 02:53 PM | #5 |
Not Yet Wild
Join Date: Sep 2014
Location: california
Posts: 42
|
Re: yamaha g1 rebuild top end
thanks will stay stock any brand of head kit ok look like it about 225.00 for kit
|
10-22-2014, 12:56 PM | #6 |
Not Yet Wild
Join Date: Sep 2014
Location: california
Posts: 42
|
Re: yamaha g1 rebuild top end
A re their any tools needed to do the top end .and should I be looking at anything else while iam in it beside the seals
|
10-22-2014, 05:49 PM | #7 |
Gone Wild
Join Date: Oct 2010
Location: Pittsburgh Pa
Posts: 1,551
|
Re: yamaha g1 rebuild top end
|
10-25-2014, 10:33 AM | #8 |
Not Yet Wild
Join Date: Sep 2014
Location: california
Posts: 42
|
Re: yamaha g1 rebuild top end
pulled cylinder .wall look good piston ok should i just change the rings or buy the top end kit
|
10-25-2014, 11:13 AM | #9 |
Gone Wild
Join Date: Oct 2010
Location: Pittsburgh Pa
Posts: 1,551
|
Re: yamaha g1 rebuild top end
Do you plan on keeping the cart for a long time? Any other plans for it? If so do the whole top end. If your looking for a quick out then it sounds like you should just re ring it.
|
10-25-2014, 09:41 PM | #10 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
|
Re: yamaha g1 rebuild top end
|
|
|
Similar Threads | ||||
Thread | Forum | |||
rebuild a G9 285CC YAMAHA | Gas Yamaha | |||
Yamaha charger rebuild | Electric Yamaha | |||
yamaha g1 lower end rebuild | Gas Yamaha | |||
Yamaha g2 backfire after rebuild | Gas Yamaha | |||
Yamaha G1 Rebuild? | Gas Yamaha |