gas pedal cuts off after 3rd of the way, electric 2011 clubcar ds iQ48v

lucky7lv · 03-05-2015, 02:15 AM

I have a 2011 club car ds regen (sepex) 48v, with a d&d NX300 controller. My F&R switch only works in forward. No reverse. And the biggest thing is when im driving I can get a steady speed of around 20-21mph. But the gas pedal is about third of tbe way. If I push the pedal further then that then I get nothing. I literally have to tap the brake then hit the go pedal again to get going again. It basically runs fine just hard to hold the pedal at 45 degrees and try not to push it to the floor. Any suggestions. Newbie here.

jjance · 03-05-2015, 09:21 AM

I Goggled "d&d NX300 controller" and got nothing for a controller.

mymonstertruck · 03-05-2015, 05:38 PM

Sounds like the MCOR isn't working with the controller properly. It might need a new Mcor4. But I would have to beat that it's something with the controller settings. I would contact alltrax or whatever company makes that controller. And tell them what's going on.

TahoeDawgZ71 · 03-05-2015, 07:58 PM

Quote:

Originally Posted by jjance

I Goggled "d&d NX300 controller" and got nothing for a controller.

So did I. I'd be interested in finding out more about the controller. That may be the root of the problem.

CCFanatic · 03-05-2015, 08:01 PM

Quote:

Originally Posted by TahoeDawgZ71

So did I. I'd be interested in finding out more about the controller. That may be the root of the problem.

NX - Maybe a Navitas controller

TahoeDawgZ71 · 03-05-2015, 08:05 PM

Quote:

Originally Posted by CCFanatic

NX - Maybe a Navitas controller

Yeah..... maybe a Navitas controller programmed for an Excel throttle.... We'll see.

lucky7lv · 03-05-2015, 09:04 PM

My correction. Its NCX300. YES I think its a alltrax controller. A few of the wires are cut on the left side as well. Im thinking of going ahead and ordering a heavy duty F&R switch to fix the no reverse however a freind said I should take it off and clean contacts first. What you guys think of all this mess

CCFanatic · 03-05-2015, 09:21 PM

IQ CCs don't need HD F-R switches. They only use a toggle switch

----------------

That 16 pin connector, is it connected to anything, or is it just hanging loose like in the picture?

jjance · 03-05-2015, 09:21 PM

You have got a lot of conflicting information. You need to post your serial number.

Sergio · 03-05-2015, 09:33 PM

Alltrax lists that controller as a ezgo. Does it say ITS throttle anywhere on the controller label?

03-05-2015, 02:15 AM	#1
lucky7lv Not Yet Wild Join Date: Jan 2015 Location: Upstate Greenville South Carolina Posts: 10	gas pedal cuts off after 3rd of the way, electric 2011 clubcar ds iQ48v I have a 2011 club car ds regen (sepex) 48v, with a d&d NX300 controller. My F&R switch only works in forward. No reverse. And the biggest thing is when im driving I can get a steady speed of around 20-21mph. But the gas pedal is about third of tbe way. If I push the pedal further then that then I get nothing. I literally have to tap the brake then hit the go pedal again to get going again. It basically runs fine just hard to hold the pedal at 45 degrees and try not to push it to the floor. Any suggestions. Newbie here.

03-05-2015, 09:21 AM	#2
jjance Gone Wild Join Date: Feb 2011 Location: Chattanooga TN Posts: 2,105	Re: gas pedal cuts off after 3rd of the way, electric 2011 clubcar ds iQ48v I Goggled "d&d NX300 controller" and got nothing for a controller.

03-05-2015, 05:38 PM	#3
mymonstertruck Gone Wild Join Date: Aug 2013 Location: Michigan Posts: 508	Re: gas pedal cuts off after 3rd of the way, electric 2011 clubcar ds iQ48v Sounds like the MCOR isn't working with the controller properly. It might need a new Mcor4. But I would have to beat that it's something with the controller settings. I would contact alltrax or whatever company makes that controller. And tell them what's going on.

03-05-2015, 09:21 PM	#8
CCFanatic DS Drivers Club Founder Join Date: Jul 2013 Location: Upstate NY Posts: 3,428	Re: gas pedal cuts off after 3rd of the way, electric 2011 clubcar ds iQ48v IQ CCs don't need HD F-R switches. They only use a toggle switch ---------------- That 16 pin connector, is it connected to anything, or is it just hanging loose like in the picture?

03-05-2015, 09:21 PM	#9
jjance Gone Wild Join Date: Feb 2011 Location: Chattanooga TN Posts: 2,105	Re: gas pedal cuts off after 3rd of the way, electric 2011 clubcar ds iQ48v You have got a lot of conflicting information. You need to post your serial number.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

03-05-2015, 09:33 PM	#10
Sergio Gone Wild Join Date: Sep 2012 Location: Charlotte, NC Posts: 9,329	Re: gas pedal cuts off after 3rd of the way, electric 2011 clubcar ds iQ48v Alltrax lists that controller as a ezgo. Does it say ITS throttle anywhere on the controller label?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Clubcar 2011 problems.	Electric Club Car
2011 Club Car Precedent Go/accelerator Pedal Issue	Electric Club Car
Pedal to the floor cuts	Electric EZGO
1987 club car electric smooth pedal then jerky pedal	Electric Club Car
87; radio cuts out and lights dim when gas pedal is pushed	Gas Club Car