|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
03-08-2016, 05:03 PM | #1 |
Getting Wild
Join Date: Jun 2015
Posts: 109
|
48 volt club car solenoid wiring help
In the process of installing a new Super Heavy duty solenoid, 1997 Club Car 48 volt. Just want to make sure I have the wiring correct. Does below look correct?
Positive Large terminal post Battery cable goes from positive side of solenoid to positive #1 battery Small green to key switch Small red wire from OBC Positive Small terminal post Small red wire to controller #1 spade connector Small white/black to micro switch F/R switch Negative Large terminal post Large yellow cable to controller B+ Negative Small terminal post Small yellow wire to #3 controller spade connector |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-08-2016, 05:14 PM | #2 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: 48 volt club car solenoid wiring help
Both Large Posts on the Solenoid are "positive", they are just on different sides of a big ON/OFF switch.
Other than that the description of the wires is correct. You are also missing: The "Pre-Charge" resistor that goes on the big solenoid posts. |
03-08-2016, 08:00 PM | #3 | |
Getting Wild
Join Date: Jun 2015
Posts: 109
|
Re: 48 volt club car solenoid wiring help
Quote:
I have the pre-charge resistor on the big solenoid posts, and the diode located between the two smaller posts. The Solenoid is from Scottyb, Super Heavy duty, so the small diode has the red end attached to the side of the solenoid that has the cable running to positive battery #1. I do have a small red wire from the small post going to controller terminal #1, its on the same side as the large post going to battery #1 positive. |
|
03-12-2016, 08:29 AM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: 48 volt club car solenoid wiring help
The solenoid should have come with install instruction which tells what color wire your positive (+) activation wire is. See below
|
10-21-2019, 03:38 PM | #5 |
Not Yet Wild
Join Date: Oct 2019
Posts: 7
|
Re: 48 volt club car solenoid wiring help
i have a 1997 club car 48 volt i have 48 volts on both small terminals of both solenoids cart wont run
|
10-21-2019, 03:41 PM | #6 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: 48 volt club car solenoid wiring help
|
10-21-2019, 04:03 PM | #7 |
Old Sky Soldier
Join Date: Dec 2011
Location: Kentucky
Posts: 3,881
|
Re: 48 volt club car solenoid wiring help
1997 most likely a regen 1. to get the cart running you can disconnect the driver side solenoid. It is for dynamic braking, cart will run fine without it. I'll let others who know more help with the rest of your problems.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Club Cart 48 volt Solenoid-diode wiring | Electric Club Car | |||
97' club car 48 volt solenoid wiring | Electric Club Car | |||
Club Cart 48 volt Solenoid-diode wiring | Electric Club Car | |||
club car 48 volt no power to solenoid | Electric Club Car | |||
94 36 volt club car solenoid? | Electric Club Car |