My G1

[cudel]

Its alive!!!!!!!!!!!!!!!!!!! well i got it running today and does it ever sound nice. But heres the question. I pre mixed my oil and gas to around 40 to 1 and then bled my oil injection line. But not sure on what oil to use for one 2 is theres a little oil line i believe not sure if i put it in the right hole that sounds so wrong and 3 is i dont even know if the oil injection is working?

[Todd Dolfi]

Yamaha sells two cycel oil. and 2; they tell you to mix first tank of gas so oil has chance to work through hoses. to check I was told to jack it up /after run awhile\ start it then pull oil line from carb. and see if you have oil.it will be just a pin amount be a splash sistem.

[cudel]

so ummmmmmmmmmmmm what side do i have to put the little oil hose on i screwed up and fogot where.

[cudel]

thanks for the help here.

[DOOmsman]

http://yamahagolfcar.com/partsandservice/#
Try here, a pic that may help.
View parts and feed in golf cart and year and model.

[GMB74]

The exact location of the oil feed nipple on the carb varies a bit from year to year, but there should only be one spot for that little line to attach. The other fitting would be for your fuel inlet. Install a new piece of clear line from the pump to the carb and you can see if the pump is working. Be sure to use a high-quality AIR-COOLED 2-cycle oil, not outboard motorboat oil, not 4-stroke oil. If you can get Yamaha brand oil, that is great, but a quality snowmobile oil is fine. I use Castrol, available at local autoparts stores.

[cudel]

thanks all