1981 ezgo robins 2 cycle ignition components

roady89 · 11-05-2010, 10:08 PM

Terminal "B" is the power connection for the module.

Terminal "C" is the output for the module.

Terminal "G" is the input to the module.

Terminal "W" provides voltage to the pickup.

tomntractor · 12-27-2010, 06:44 PM

I have the dr100 and am still not quite sure how the wiring goes as the old ignitor was pulled out before I bought this unit. I have the 2 lines from the flywheel and a lead from the coil . There is also a lead unscrewed from what looks like a small regulator. Is there a diagram that would help me with this retrofit?

11-05-2010, 10:08 PM	#11
roady89 nimda Join Date: Jun 2007 Posts: 13,022	Re: 1981 ezgo robins 2 cycle ignition components Terminal "B" is the power connection for the module. Terminal "C" is the output for the module. Terminal "G" is the input to the module. Terminal "W" provides voltage to the pickup.
roady89 nimda Join Date: Jun 2007 Posts: 13,022

12-27-2010, 06:44 PM	#12
tomntractor Not Yet Wild Join Date: Dec 2010 Posts: 2	Re: 1981 ezgo robins 2 cycle ignition components I have the dr100 and am still not quite sure how the wiring goes as the old ignitor was pulled out before I bought this unit. I have the 2 lines from the flywheel and a lead from the coil . There is also a lead unscrewed from what looks like a small regulator. Is there a diagram that would help me with this retrofit?
tomntractor Not Yet Wild Join Date: Dec 2010 Posts: 2

Similar Threads
Thread	Forum
Ezgo 2pg 1981 Ignition Tshoot N Repair Spark Control	Gas EZGO
88 ezgo robins 244 cc	Gas EZGO
88 ezgo robins 244 cc	Gas EZGO
4 cycle ignition problem	Gas EZGO
1981 marathon and winterizing 2-cycle fuel stabilizer	Gas EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum